whirlpool F70 errror washer

[krazytech]

checking with you guys...

f70 error could not program machine...
Removed MI3 on the CCU machine came to life could program, door locked, filled with water then F28 error but No tub movement.

As far as I can tell I need a MCU (Motor Control Unit) but with the cost of over $200 I want to be sure what do you guys think?

krazytech

Model WFW9200SQ00

[JWWebster]

We have the manual to that washer.

[JPG]

I have had the same problem but i would replace all 3 boards and it still wouldn't work, than found out whirlpool is replaceing the wire harness if the boards do not fix it.....yuk !!!!!!!

[JWWebster]

JPG that is good to know.

[krazytech]

JPG be sure the blue wire that is on the MCC it should face to the left ....BTW the Motor control fix it...

[JPG]

Hi   thanks could u b more specific? I think all the connectors only go on one way??? Is this the mcu or control board,    does the blue wire actually go on @ different ways??

[krazytech]

yes The blue wires on the top MCC (bottom left of machine) can go on both ways ... check it out.. hope it helps