thank you..by the manual it states :
CODE- Failure of defrost mode
CONTENTS- When defrost sensor doesn’t reach 8°C within 2 hours after starting defrost.
REMARKS-Snapping of defrost heater or Temperature fuse, pullout of connector (indicated minimum 2 hours after failure occurs)
Does this mean that my defrost control assembly is broken or either the defrost sensor or FUSE-M?
3-3 DEFROST CONTROL ASSEMBLY
Defrost Control assembly consists of Defrost Sensor and FUSE–M.
The Defrost Sensor works to defrost automatically. It is attached to the metal side of the Evaporator and senses its
temperature. At 72°C, it turns the Defrost Heater off.
Fuse-M is a safety device for preventing over-heating of the Heater when defrosting.
1. Pull out the grille assembly. (Figure 6)
2. Separate the connector with the Defrost Control
assembly and replace the Defrost Control assembly
after cutting the Tie Wrap. (Figure 7)