Yeah its pricey. The timed dry and everything elese works fine, just the auto dry was just not sensing that the clothes were still wet. I disconnected the two wires off the sensor bar in the drum and tied them together to see if it made a difference and it didn't, so I left them tied together and to the control panel off to see if I had continuity at the board, and it did. That's when figured it was the board and to it out and saw the burnt stuff. It stinks cause I had a matching washer to sell with it, now I am going to just have to sell the washer by itself. Put this one back in the barn for later. Can't drop $150 bucks on this one right now.