I have a Jenn-Air SVE47100B
Oven Range that has a stuck broiler (won't shut off) and a F2 code.
I was using the Bake function last nite when the oven suddenly started beeping--I noticed the broiler was stuck on and wouldn't shut off. The control panel was displaying a F2 error code.
From what I've deduced (looking at Service Manual) it looks like that comes from the Oven Sensor and indicates that the sensor is sensing temps over the normal range for baking. I can't figure out, though, what is causing the broiler to stay on. I'm assuming there's a short or other problem in the control panel module, which is one single sealed unit.
Any suggestions on what to test or check? I'm thinking the sensor is probably fine (it's sensing high temps in Bake) and the control panel is causing the broiler to stay on. Thanks!