Author Topic: Whirlpool dishwasher won't stop running  (Read 4078 times)

Offline anniecox

  • VIP Member
  • Member Since: Sep 2010
  • Posts: 2
Whirlpool dishwasher won't stop running
« on: September 05, 2010, 07:59:52 AM »
Hi,
   I have a Whirlpool Model GU980SCGTT dishwasher that just keeps cycling. We have kept the door open to prevent it. Any ideas of how to fix this without either replacing or calling for a repair Thanks.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1513
  • Country: us
    • Buy me a beer through paypal
Re: Whirlpool dishwasher won't stop running
« Reply #1 on: September 05, 2010, 02:18:04 PM »
Can you stop it by pressing cancel?  It might be stalling waiting for the water to heat up.  After it stalls and has been running awhile, is the water steaming hot, lukewarm or cold? If it's steaming hot, it's either the thermistor or control board.  The thermistor should read about 50KΩ at room temperature and about 12KΩ at 140F. If it's lukewarm or cold, then there's a problem in the heating circuit. The heating circuit consists of the heater, high limit thermostat, control board and door switch if it has a plastic tub.  Check those components and wiring.

 

Whirlpool dishwasher stop/starting thru whole cycle

Started by ataraxium

Replies: 0
Views: 2224
Last post October 15, 2009, 05:36:51 PM
by ataraxium
whirlpool DU1030XTXS1 dishwasher stops running after first wash cycle

Started by Lanelle

Replies: 1
Views: 2062
Last post August 01, 2012, 07:45:33 AM
by AJ
Whirlpool Dishwasher GU1200XTLQ1 Dead, clean light blinks.

Started by barb

Replies: 2
Views: 7119
Last post August 11, 2007, 08:05:47 AM
by barb
Whirlpool dishwasher manual

Started by naes

Replies: 15
Views: 18263
Last post August 06, 2007, 05:26:57 PM
by AJ
Video: Whirlpool Dishwasher - Check for foreign objects in food chopper.

Started by AJ

Replies: 0
Views: 20950
Last post August 08, 2007, 12:43:21 PM
by AJ
Whirlpool Dishwasher Model GU940SCGB3 Door Leak

Started by JimKaran

Replies: 10
Views: 13304
Last post September 13, 2007, 11:39:39 AM
by AJ