Author Topic: Maytag Range  (Read 2827 times)

Offline madbchron

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 14
Maytag Range
« on: September 03, 2010, 08:40:04 AM »
oven error code f3 checked you site for info and ordered from you the oven sensor replaced it last night used oven at 350  for about one hour seemed ok shut it off and later turned it to clean after about 1/2 hour oven shut down and F1 code came up  what is the next step. thanks MADBCHRON

Model mes5870aaq

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Range
« Reply #1 on: September 03, 2010, 11:35:16 AM »
F1 Defective Touch Pad or Membrane Replace Touch Pad or Membrane?
Maybe someone else will come in with a link to your tech sheet for the exact problem.
« Last Edit: September 03, 2010, 11:36:58 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Range
« Reply #2 on: September 03, 2010, 11:40:36 AM »
F1 Defective Touch Pad or Membrane Replace Touch Pad or Membrane?
Maybe someone else will come in with a link to your tech sheet for the exact problem.

Here is the service manual for that model.

16010161 Maytag Gas and Electric Range Service Manual
Hope you find our site helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Range
« Reply #3 on: September 03, 2010, 12:39:34 PM »
JW,

Can you download the service manual I listed above?

madbchron is having problems downloading it and I don't understand why.

I have tried it a few times and it downloads fine for me, how about you?

Hope you find our site helpful.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Maytag Range
« Reply #4 on: September 03, 2010, 12:41:33 PM »
I'm able to download it just fine.

madbchron is AOL your ISP?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
« Last Edit: September 03, 2010, 12:51:56 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline madbchron

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 14
Re: Maytag Range
« Reply #6 on: September 03, 2010, 12:46:53 PM »
yes AOL is m ISP

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Range
« Reply #7 on: September 03, 2010, 12:52:38 PM »
Mad were you able to get er done?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Range
« Reply #8 on: September 03, 2010, 01:19:06 PM »
Link works for me.
Take a Kid fishing.

Offline madbchron

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 14
Re: Maytag Range
« Reply #9 on: September 03, 2010, 01:20:02 PM »
I HAD TO GO THRU INTERNET EXPLORER TO GET THE DOWNLOAD DONE  THERE MUST BE A PROBLEM USING AOL MANY THANKS MADBCHRON

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Maytag Range
« Reply #10 on: September 03, 2010, 01:34:20 PM »
I HAD TO GO THRU INTERNET EXPLORER TO GET THE DOWNLOAD DONE  THERE MUST BE A PROBLEM USING AOL MANY THANKS MADBCHRON

Glad to hear you got it downloaded. I'm a firefox fan myself. :)

Offline madbchron

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 14
Re: Maytag Range
« Reply #11 on: September 03, 2010, 02:01:19 PM »
Several years ago i had an admiral oven that had a touch control problem i turned ot to be some liquid got between the membrane and the control when cleaned it returned working
i am somewhat familiar with there opperation but in the manual it does not address this unit and weither it has a removable membrane and if parts are available or replacable would you have knowledge of this and should i do an inspection of the control

madbchron

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Range
« Reply #12 on: September 03, 2010, 03:05:07 PM »
Here is the Part Diagram for your oven.

Looks like the membrane is part of the clock/control unit, part # 5760M286-60
Hope you find our site helpful.

 

Maytag Range - Does not heat

Started by AJ

Replies: 4
Views: 8637
Last post February 23, 2008, 04:58:52 PM
by AJ
Maytag Range no Oven Operation

Started by TechnicianBrian

Replies: 0
Views: 2970
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian
16010161 Maytag Gas and Electric Range Service Repair Manual

Started by AJ

Replies: 0
Views: 5770
Last post April 03, 2008, 09:54:39 PM
by AJ
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 5501
Last post June 14, 2008, 11:19:00 AM
by straycatt
Maytag Ceramic Cooktop Range digital control panel display is stuck

Started by wghman

Replies: 2
Views: 2487
Last post November 02, 2008, 07:39:21 AM
by wghman
Maytag Smooth Top Range burner issue

Started by mtgappdrh

Replies: 4
Views: 5651
Last post November 22, 2008, 09:21:40 AM
by JWWebster