Author Topic: CORDLESS TOOLS  (Read 5763 times)

Offline chic

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 21
CORDLESS TOOLS
« on: March 12, 2008, 05:26:05 PM »
Hi guys,just was wondering what kind of cordless drills yopu guys use if any.During my training with A&E i haVE NOT USED much of any cordless.I purchesed the bosch ps-10 right  angled nut driver.it has slow start,variable speed and feels good in my hands.I bought it because of it's clutching system,it wont over torqe any screws when going into plastic or critical applications.
 Any thoughts on this subject ,I would love to here.

  chic.
"The best cordless tool is a fishing pole"

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: CORDLESS TOOLS
« Reply #1 on: March 12, 2008, 07:21:44 PM »
I use an 18 volt B&D Firestorm. Runs all week long on one charged battery, although it came with 2. Quick-chuck, etc....and it feels good in my hand.
« Last Edit: March 12, 2008, 07:23:42 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline BrntToast

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 388
  • Mayday Appliance Service
    • frigidaire service blog
Re: CORDLESS TOOLS
« Reply #2 on: March 13, 2008, 04:24:58 AM »
i use a cordless impact
makes quick work of tub and tranny jobs, and its alot easier on the wrist then a drill cause it doesn't jerk when the bolt is tight
Mayday Appliance Service
Winnipeg Manitoba Canada


The only stupid question is the one not asked

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9473
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: CORDLESS TOOLS
« Reply #3 on: March 17, 2008, 06:56:32 PM »
Makita 18V 1/2" Cordless Driver-Drill Kit (2-Speed, Variable Speed, Reversible)
Model 6343DWDE

Hope you find our site helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: CORDLESS TOOLS
« Reply #4 on: March 17, 2008, 07:48:34 PM »
mine is green and comes from germany is all I know
« Last Edit: March 17, 2008, 07:50:51 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline ElectronGuru

  • VIP Member
  • Member Since: Sep 2013
  • Posts: 4
Re: CORDLESS TOOLS
« Reply #5 on: September 05, 2013, 07:48:49 PM »
The good companies each have a color (Bosch is also good and also blue but is less popular in the US):

Yellow = DeWalt
Red = Milwaukee
Blue  = Mikita

Drill drivers are drills that can also drive.  Impact drivers are drivers that can also drill.  They are now often sold in sets.

Online theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1334
  • Country: us
    • Buy me a beer through paypal
Re: CORDLESS TOOLS
« Reply #6 on: September 05, 2013, 08:04:44 PM »
I have a Ryobi set from Home Depot 18 volt, impact driver and drill with 2 lithium batteries in a bag. Bought them for $99.00. Work great. 

Offline lesguns

  • Technician
  • Member Since: Aug 2011
  • Posts: 132
  • Country: us
Re: CORDLESS TOOLS
« Reply #7 on: September 05, 2013, 09:25:43 PM »
I use a bosch PS20 and love it. :)

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 657
  • Country: us
Re: CORDLESS TOOLS
« Reply #8 on: September 06, 2013, 07:17:28 PM »
I use a Dewalt 12 volt with lithium batteries. Lasts a week and a half. I also use the flashlight that you can purchase separately and really like it. Lasts all week on one charge The drill has 3 LED's and is compact so it fits in my bag. The flashlight has a swivel head, magnetic base and and a stand that folds out.

Offline Larry the applia

  • Technician
  • Member Since: Jun 2010
  • Posts: 136
« Last Edit: September 06, 2013, 07:25:14 PM by Larry the applia »

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 707
  • Country: ca
Re: CORDLESS TOOLS
« Reply #10 on: September 07, 2013, 11:32:41 AM »
Looks a bit pricey for 2.4 volts .Does it have the umff to do the job ?

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1519
  • Country: us
    • Buy me a beer through paypal
Re: CORDLESS TOOLS
« Reply #11 on: September 07, 2013, 12:23:07 PM »
I have that Milwaukee driver.  I've had it for at least ten years. I've gone through six batteries and I even replaced the housing when it cracked. It doesn't have enough power to break loose most screws.  The shaft is locked when idle, so you have to twist it to break the screw loose and then power it the rest of the way out. I think I cracked the housing from twisting it too hard a few times. It sits mostly unused since I got my Bosch PS20.  It's a good driver but the Bosch is much better.

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 707
  • Country: ca
Re: CORDLESS TOOLS
« Reply #12 on: September 07, 2013, 12:57:20 PM »
Tgoods I bought Bosch  PS20 driver also . Love it lots of power .Way better than a cheap 3.9 v unit I had before

Online hesterappliance

  • Technician
  • Member Since: Oct 2012
  • Posts: 63
Re: CORDLESS TOOLS
« Reply #13 on: September 07, 2013, 08:39:28 PM »
 I use matco cordless driver,1/4ratchett,drill,light and 1/4 impact that uses the same battery.Best battery life that I have seen. There 3/8 and 1/2 impact are strong.I pulled the basket nut (1 11/16) off a ge washer when a corded Dewalt could not.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9473
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: CORDLESS TOOLS
« Reply #14 on: September 07, 2013, 08:48:12 PM »
Had one of them Milwaukee's too, must have been 20 years ago or long now.
Did they make them that long ago?
Hope you find our site helpful.

 

cordless tools

Started by dentdaddy

Replies: 12
Views: 2474
Last post September 05, 2013, 07:24:48 PM
by ElectronGuru
Couple of old tools

Started by AJ

Replies: 0
Views: 2649
Last post May 25, 2008, 07:08:18 PM
by AJ
Appliance Repair Tools

Started by AJ

Replies: 0
Views: 31058
Last post July 25, 2008, 12:07:05 PM
by AJ
tools

Started by diyguy

Replies: 3
Views: 2816
Last post January 21, 2009, 07:31:36 AM
by Mr. Fix-It
Craftsman tools?

Started by cal

Replies: 15
Views: 6136
Last post September 20, 2013, 09:58:38 PM
by Wedgeman55
TOOLS

Started by MajorApp

Replies: 7
Views: 2548
Last post January 24, 2013, 09:17:17 PM
by Wedgeman55