Author Topic: shaking ul code cabrio  (Read 3860 times)

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 121
shaking ul code cabrio
« on: August 18, 2010, 02:46:02 PM »
HI  I have 3 different machines all shaking real bad causing the ul code to come on the washer, the outer tub bearing seems quiet and good? the shocks seem good? All these washers are between 3-5 years old.....tks   JPG

Model wtw6600sw1

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: shaking ul code cabrio
« Reply #1 on: August 18, 2010, 04:54:26 PM »
Does it give the unbalanced load failure even it nothing is in the machine? That could be the balance ring. One guy suggested he drilled holes in the balance ring because he heard liquid sounds in it and the out of balance deal went away. Cabrio Service manual
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 121
Re: shaking ul code cabrio
« Reply #2 on: August 31, 2010, 03:21:53 PM »
ok I finnaly figured out way all these cabario washers are shaking real bad after 2-5 years.... Even if no clothes are in them. It is the 4 suspension rods. even though they look completely normal there not. They come in a set of 4 at the local supply house.  There is water in the top and bottom of the inner tub that is normal. They even redesigned the rods by adding another bushing......

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: shaking ul code cabrio
« Reply #3 on: August 31, 2010, 06:10:02 PM »
Great info.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Whirlpool Cabrio High Efficiency - F2 Code

Started by Blaiser

Replies: 11
Views: 3666
Last post January 06, 2012, 03:23:32 PM
by whirlpooltech
Whirlpool Cabrio F50 code

Started by appliancedoctorbrian

Replies: 4
Views: 731
Last post April 30, 2013, 10:47:15 PM
by appliancedoctorbrian
F52 Cabrio code NEW AND UPDATED INFO NEEDED

Started by NITROITCH

Replies: 3
Views: 439
Last post August 09, 2013, 07:20:34 AM
by NITROITCH
Cabrio washer throws F50 code

Started by go400

Replies: 1
Views: 275
Last post September 10, 2013, 06:58:46 AM
by go400
Whirlpool Cabrio lid locked error code E1 F2.

Started by Bat65

Replies: 3
Views: 124
Last post April 09, 2014, 04:44:41 PM
by Select Appliance
Whirlpool electronic error code

Started by roxgirl

Replies: 1
Views: 4377
Last post July 25, 2007, 08:15:36 PM
by AJ