pressure switch trying to make sure its set right ge profile washer

[hotpointtech]

hi does any one know where i can get  a manual or a copy of the manual that tells me how to check to make sure the new pressure switch i just installed is set right it seems to sometimes not fill to the proper level and other times it fills correctly.
thanks


Model wpsb8060b0ww

[jumptrout51]

They are preset and should not be changed.
If you have a fill issue,remove the front panel and check the air dome and pressure tube on the side of the tub for blockage or pinching.

[RegUS_PatOff]

I'm not sure if this will help, but when installing the Tubing on the Pressure Switch,
the Tub must be empty.

[hotpointtech]

this i know iam actualy a tech i have serviced appliances for 23 years.
i just wanted to know if GE had a guide that tells you how many rows up the tub the water is supposed to go for each setting

[JWWebster]

If the switch is intermittent and the tube is clear you need another switch. I have not had any luck monkeying with a water level switch.

[jumptrout51]

Check for a pin hole in the air tube.

[hotpointtech]

thanks jump and jb webster the tube is hole free as far as i can tell with pressure on one end and the other plugged.
so i say its time for yet another switch the new one worked flawlessly for 7 months got to love this new Chinese parts company for GE