Author Topic: agitator cam kit  (Read 2219 times)

Offline viking351

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 151
  • Country: us
agitator cam kit
« on: August 02, 2010, 10:26:05 AM »
i'm replacing the dog ears on my agitator so i bought the kit.
FSP part# 3363663 is the cam the dogs slide into. FSP# 3363661(bearing/washer) is the black retaining ring that slides up over the cam.

does the black ring slide up flush against the slots where the dog ears are or does the black ring slide up the opposite way? when i look at the diagram on parts pro that black ring diagram#21 seems to be upside down!

the black ring has the FSP part# stamped on it. i assume that side slides up against the slots the dog ears are in thereby making a flush fit. the opposite way the black ring would stand proud which appears wrong even though parts pro diagram shows it in that orientation.



Model kaws577eq0

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9249
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: agitator cam kit
« Reply #1 on: August 02, 2010, 11:22:20 AM »
Quote
does the black ring slide up flush against the slots where the dog ears are or does the black ring slide up the opposite way?

The black ring should slide up flush so it holds the dogs in place.

The diagram does seem to show it flipped around the wrong way.





Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: agitator cam kit
« Reply #2 on: August 02, 2010, 12:11:20 PM »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9249
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: agitator cam kit
« Reply #3 on: August 02, 2010, 12:17:06 PM »
 O0

 

Video: How to replace the "Dogs" in your Whirlpool washer agitator.

Started by AJ

Replies: 1
Views: 9500
Last post May 25, 2008, 11:09:16 PM
by jean
agitator not spinning

Started by whit

Replies: 2
Views: 2169
Last post October 22, 2007, 06:21:57 PM
by Pegi
Whirlpool washer LSQ9010KQ0...Can't seperate Agitator

Started by Matt F.

Replies: 5
Views: 3618
Last post December 16, 2007, 06:09:05 PM
by AJ
Agitator only spins one way

Started by will_m

Replies: 2
Views: 3055
Last post February 20, 2008, 06:00:55 PM
by will_m
Agitator shaft agitated.

Started by dwhite65

Replies: 2
Views: 1516
Last post February 26, 2008, 10:07:28 AM
by dwhite65
Amana washer agitator rattles during spin cycle

Started by suec

Replies: 7
Views: 6082
Last post July 15, 2008, 08:43:36 AM
by JWWebster