Author Topic: Display stuck in CAL.  (Read 1475 times)

Offline dwhite65

  • VIP Member
  • Member Since: Feb 2008
  • Posts: 3
Display stuck in CAL.
« on: August 12, 2010, 02:08:22 PM »
I have a Maytag Double Range.  The bottom over does not work. The display reads CAL and will not reset either via control or power cycle.  Everything else seems to be fine.  Any ideas?  Thank you.

Model MER6741BAB

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: Display stuck in CAL.
« Reply #1 on: August 12, 2010, 06:12:47 PM »
Not sure what CAL means... I looked threw the owners manual for your machine, the Tech sheet, And the service manual, and saw no indication of "CAL" as a code, or display option.

Here is your owners manual in PDF form.

Here is your Tech Sheet.

Here is the full service manual.

I would lean towards a failed ERC control(clock assy).  But before I would order any parts, I would check and see if there are any error codes stored in the clock assy.  Follow the Tech sheet, or Service manual to enter into diagnostic mode.  Furthermore, If you find codes stored, and need help deciphering what you find, please ask us for assistance!  Good luck!   
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Display stuck in CAL.
« Reply #2 on: August 13, 2010, 06:39:48 AM »
That would probably be calibrate.
The Whirlpool ERC's that I change have to be calibrated to the range based on cavity size.
This oven may have lost its' calibration code.
Take a Kid fishing.

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: Display stuck in CAL.
« Reply #3 on: August 13, 2010, 04:15:09 PM »
You would think, if that was the case, that it would explain how to do so in the service manual.   That's what I also assumed it meant, but, after all the Maytag ERC's I have changed, and never had to calibrate one to oven size, I wouldn't think this machine has that option.  I thought it possibly meant oven temp calibration.   I went to service matters and looked at all the bulletins and did not find anything, anywhere.  Kind of odd.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

 

Maytag Ceramic Cooktop Range digital control panel display is stuck

Started by wghman

Replies: 2
Views: 2630
Last post November 02, 2008, 07:39:21 AM
by wghman
GE Microwave No Display, No Operation

Started by TechnicianBrian

Replies: 0
Views: 4922
Last post April 15, 2008, 09:57:53 PM
by TechnicianBrian
Kitchenaid Microwave Crazy Display

Started by TechnicianBrian

Replies: 0
Views: 1847
Last post May 07, 2008, 06:16:37 PM
by TechnicianBrian
RS2466CW1 Display on viking range

Started by 66carlos66

Replies: 3
Views: 2928
Last post August 20, 2008, 06:30:22 AM
by Repair-man
Dacor Microwave Display Stopped Working

Started by TechnicianBrian

Replies: 0
Views: 2786
Last post October 28, 2008, 05:27:24 AM
by TechnicianBrian
Amana Radarange: door stuck closed with broken linkage to interlock

Started by bloomerang

Replies: 2
Views: 2319
Last post January 15, 2009, 02:37:15 PM
by RegUS_PatOff