New to board, did thorough search but did not find any results for this model number Microwave/Range oven we just acquired this past weekend.
The touchscreen on the Whirlpool G2Microven does not work. When I plug in the the Microven, the touchpad beeps "TOUCH" in morse code (I'm a ham op, and recognized the CW on bootup) and a message board appears on the display indicating "TOUCH ERROR" with the following info:
Y High Pass 255 255
Y HiLo Pass 252 3
Y Low Pass 1 0
X High Fail 255 04
X HiLo Pass 255 0
X Low Fail 236 0
Image of above error (hopefully) attached.
Oven was manufactured in April, 2006. We acquired it along with a Whirlpool fridge, dishwasher, and stove. So far this is only hiccup.
Ive checked all known fuses and none look blown.
One other note is that before I removed the panel where the touchpad was and inspected the boards, I was getting "FAIL" not only on X High and X Low but also Y High and Y Low with both X HiLo and Y HiLo passing.
Any advise is appreciated.