“”I hope you still check this forum! “” I do from time to time. But I did not get e-mail notification from this post….I’m not sure why I need to check my profile.
See this post for additional info. I have put some comments related to the Clutch Malfunction causing your dc/Uc unbalance error codes. http://appliancejunk.com/forums/index.php?topic=5312.0
Servicematters put a coin slot on the sight but this site and others have the SM.
If you have any issues post back and I will try to help as an owner of the machine. I have a detailed write up of how to check the One-Way roller clutches bearing in the clutch pulley and the upper bearing ring if used in your series of FAV6800A/FAV9800A in the above link.
I would suggest you and other owners become familiar with how to check for proper One-Way Roller clutch bearing operation. It will help demystify dc/Uc error unbalance error codes related to the wash tub banging around in Spin Cycle.
If you can’t clean up the One-Way Roller clutches and you have to replace I would us the $75 Clutch pulley not the $150 flavor. I post very little at the other site you mentioned. I hope other owners will visit this site for support…….Dick