Maytag Neptune uC error code

[AJ]

Thank you so much!

Your welcome,

Please let us know if you have any other questions about repairing your washer. If you do simply start a new topic.

[dh1200s]

SMD66062

“”I hope you still check this forum! “” I do from time to time.  But I did not get e-mail notification from this post….I’m not sure why I need to check my profile.
See this post for additional info.  I have put some comments related to the Clutch Malfunction causing your dc/Uc unbalance error codes.

 http://appliancejunk.com/forums/index.php?topic=5312.0

Servicematters put a coin slot on the sight but this site and others have the SM.

If you have any issues post back and I will try to help as an owner of the machine.  I have a detailed write up of how to check the One-Way roller clutches bearing in the clutch pulley and the upper bearing ring if used in your series of FAV6800A/FAV9800A in the above link.   

I would suggest you and other owners become familiar with how to check for proper One-Way Roller clutch bearing operation.  It will help demystify dc/Uc error unbalance error codes related to the wash tub banging around in Spin Cycle.

If you can’t clean up the One-Way Roller clutches and you have to replace I would us the $75 Clutch pulley not the $150 flavor.  I post very little at the other site you mentioned.  I hope other owners will visit this site for support…….Dick   

[dh1200s]

""But I did not get e-mail notification from this post""

My error I did get notification.....can't blame on my tri-focals.....just attention to detail.