Author Topic: Maytag Neptune uC error code  (Read 8945 times)

Offline dh1200s

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 35
Re: Maytag Neptune uC error code
« Reply #10 on: July 27, 2010, 11:47:39 AM »
Sorry correction 6207-2RS not 6207-RS.

Offline dh1200s

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 35
Re: Maytag Neptune uC error code
« Reply #11 on: July 29, 2010, 02:11:22 PM »
Rick and other FAV6800A/FAV9800A DIY'ers,

See the link below this explains the principles behind the design of the One-Way Roller Clutch bearings used in the FAV6800A/FAV9800A Series 10 & 11 machines and the Clutch Pulley Mounted One-Way Roller Clutch bearing In the Series 12 and above Clutch Pulley.
 
This why I use WD-40 for a bearing wash and recommend Slick-50 One Lube for bearing lubrication. I also recommend to any owners if you replace your Clutch Pulley you lube your new Clutch Pulley and Upper bearing ring (if used).

They may have been sitting on a warehouse shelf for many years.  You won't need a WD-40 rinse just some a Slick-50 One Lube for re-lube of your new bearing assemblies.  Try the little test I mentioned so you know how the bearing should lock up in CCW/Spin direction and slip freely in CW/Agitate/Tumbler rotation.

 
One-Way Roller Clutch bearing operation and maintenance. http://www.rctek.com/technical/bearings/bearings_one_way.html


Good luck........Dick

Offline SMD66062

  • VIP Member
  • Member Since: Oct 2010
  • Posts: 2
Re: Maytag Neptune uC error code
« Reply #12 on: October 05, 2010, 02:01:16 PM »
I hope you still check this forum!  Do you have any idea where there is an online manual for this model?  I've Googled it and all I found was a link for the manual posted at FixYa dot com, but it is no longer active.

I am pretty sure this clutch issue is what's happened to mine today.  My hubby isn't very mechanically inclined but if it could be as simple as greasing something, I think between the two of us we could figure it out.

I got the DC error, only had a soccer uniform and a shirt in the washer.  Rearranged anyway, and it just wouldn't finish.  If I take everything out, it works fine.  I opened the lid and the white agitators spin clockwise smoothly, they will spin counter smoothly sometimes and sometimes they won't.  Feels like they lock.  The counter clockwise movement is completely random when it'll move and when it won't.

Bought this in 2004, #108423...serial.  Never had any issues until now.  Besides the major clothes tangles that it produces, when the absent center agitator technology was suppose to prevent that...not.

Thanks,
Sandy

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9606
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Neptune uC error code
« Reply #13 on: October 05, 2010, 03:27:13 PM »
Quote
Do you have any idea where there is an online manual for this model?

You can download the service manual here.

16022808 Maytag Top Load Neptune Washer Service Manual
Hope you find our website helpful.

Offline SMD66062

  • VIP Member
  • Member Since: Oct 2010
  • Posts: 2
Re: Maytag Neptune uC error code
« Reply #14 on: October 05, 2010, 03:29:43 PM »
Thank you so much!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9606
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Neptune uC error code
« Reply #15 on: October 05, 2010, 04:13:05 PM »
Thank you so much!

Your welcome,

Please let us know if you have any other questions about repairing your washer. If you do simply start a new topic.


Hope you find our website helpful.

Offline dh1200s

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 35
Re: Maytag Neptune uC error code
« Reply #16 on: October 07, 2010, 09:52:25 AM »
SMD66062

“”I hope you still check this forum! “” I do from time to time.  But I did not get e-mail notification from this post….I’m not sure why I need to check my profile.
See this post for additional info.  I have put some comments related to the Clutch Malfunction causing your dc/Uc unbalance error codes.

 http://appliancejunk.com/forums/index.php?topic=5312.0

Servicematters put a coin slot on the sight but this site and others have the SM.

If you have any issues post back and I will try to help as an owner of the machine.  I have a detailed write up of how to check the One-Way roller clutches bearing in the clutch pulley and the upper bearing ring if used in your series of FAV6800A/FAV9800A in the above link.   

I would suggest you and other owners become familiar with how to check for proper One-Way Roller clutch bearing operation.  It will help demystify dc/Uc error unbalance error codes related to the wash tub banging around in Spin Cycle.

If you can’t clean up the One-Way Roller clutches and you have to replace I would us the $75 Clutch pulley not the $150 flavor.  I post very little at the other site you mentioned.  I hope other owners will visit this site for support…….Dick   

Offline dh1200s

  • VIP Member
  • Member Since: Dec 2008
  • Posts: 35
Re: Maytag Neptune uC error code
« Reply #17 on: October 07, 2010, 10:36:31 AM »
""But I did not get e-mail notification from this post""

My error I did get notification.....can't blame on my tri-focals.....just attention to detail.

 

Maytag Neptune TL Washer UC Error Code

Started by TechnicianBrian

Replies: 0
Views: 22974
Last post October 14, 2008, 06:38:41 AM
by TechnicianBrian
Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 8471
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
Maytag Neptune Lr code and now door lock problems

Started by anniechoco

Replies: 2
Views: 9328
Last post December 07, 2008, 09:01:38 AM
by anniechoco
maytag neptune washer top loader error message OL8 WHAT DOES IT MEAN

Started by getitdone

Replies: 3
Views: 2381
Last post January 26, 2009, 07:39:14 PM
by Repair-man
My Maytag gives the error code "do" and the door is closed.

Started by briancalhoun

Replies: 2
Views: 1792
Last post August 15, 2009, 12:14:54 PM
by briancalhoun
HR error code Maytag Washer

Started by gkofc

Replies: 0
Views: 2474
Last post January 14, 2010, 09:25:13 AM
by gkofc