Author Topic: WM only leaks during wash cycle  (Read 1879 times)

Offline mpga1

  • VIP Member
  • Member Since: Mar 2008
  • Posts: 2
WM only leaks during wash cycle
« on: March 19, 2008, 01:32:08 PM »
Gibson GWX933AS1 fills fine, but leaks out back during wash cycle.  It appears the when the agitator starts the tub begins to spin continously clockwise causing the water to slosh over the tub.  All appears fine during spin cycle.  We took the cover off and found pieces of what appears to be a gasket of sorts on a pan just above the base of the washer.  Any ideas?

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: WM only leaks during wash cycle
« Reply #1 on: March 19, 2008, 04:21:56 PM »
This machine likely has a bad transmission. It is designed to spin only when the motor is turning a certain direction and is not supposed to spin while agitating. No telling what you found under the machine, debris-wise. You gotta ask yourself if putting $200 into this machine to begin with is economically sound.... my first option would be to start shopping around.  It would be like opening a can of worms to strip this unit down for a major overhaul like that, as there are tub bearings and seals to worry about as well. This unit was not designed for durability.

It was made by a branch of Frigidaire, and you may get some insight by looking at the Frigidaire Top Load Manual to see if you want to tear into it or not.
« Last Edit: March 19, 2008, 06:41:40 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Whirlpool makes noise at end of wash cycle

Started by brfiel

Replies: 6
Views: 3266
Last post September 22, 2007, 01:01:53 PM
by AJ
Oil leaks and clothes still wet after cycle complete

Started by tech718

Replies: 5
Views: 2971
Last post February 13, 2008, 08:18:50 PM
by AJ
Washing Machine jumps around on spin cycle and leaks

Started by Sherri D

Replies: 3
Views: 7421
Last post September 15, 2008, 01:37:03 PM
by Repair-man
Roper Washer Stops during the Wash Cycle.

Started by TechnicianBrian

Replies: 1
Views: 3087
Last post May 28, 2013, 03:37:08 AM
by Rick32k
Kenmore Model 70 stoped working during the wash cycle

Started by kooken

Replies: 7
Views: 2880
Last post July 12, 2009, 09:11:20 PM
by whirlpooltech
Wash Cycle

Started by jaxona

Replies: 1
Views: 1442
Last post September 16, 2009, 11:00:38 PM
by JWWebster