Author Topic: Very Old Kenmore Dryer  (Read 1977 times)

Offline hleebeard@sbcglo

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 24
Very Old Kenmore Dryer
« on: July 17, 2010, 10:05:39 PM »
This dryer still works but I want to replace the two drum wheels, belt, front and rear seals and felt bearings.  I don't know part numbers for this old machine but I know old model number.   The model number is no longer listed by parts parts suppliers.  In the old sears repair manual it is the 29" wide type A with the wide drop down door with round opening and the lint filter on the top right.  How do I know I am getting correct parts to do this job?

If you know the Sears or Kenmore part numbers that would help me much.

Best Regards,
Lee

Model 6508923WOD

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Very Old Kenmore Dryer
« Reply #1 on: July 17, 2010, 10:23:39 PM »
Hi,

If you got that model number from the manual you may want to look at the model/serial number tag on the dryer itself.

Chances are the model/serial number tag is behind the door so just open the door and take a  look for the model number.

If you did get the model number from the dryer itself I believe if you take a second look you may notice a 110. in front of the numbers you posted, so the full model number maybe 110.6508923WOD

Quote
I want to replace the two drum wheels, belt, front and rear seals and felt bearings.

These are very common parts and if you take it apart and just look at them you may see part numbers on the old belt and drum wheels, but in any case I searched for parts at http://RepairClinic.com using 110.6508923WOD and got these parts listed.

http://www.repairclinic.com/Appliance-Parts?s=t-110.6508923WOD-%3d%3d




« Last Edit: July 17, 2010, 10:25:15 PM by whirlpooltech »

Offline viking351

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 147
  • Country: us
Re: Very Old Kenmore Dryer
« Reply #2 on: July 18, 2010, 07:36:20 PM »
I have in stock seal#239087 (retail $39), roller wheel set of 2 (retail $25) and idler pully#691366(retail$16).

total retail $80 you can have them for $50.

I accept paypal.

viking

 

Kenmore Dryer

Started by jdman

Replies: 6
Views: 4390
Last post August 12, 2007, 07:30:06 PM
by AJ
Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 2924
Last post August 07, 2007, 08:21:33 AM
by AJ
Kenmore 71802 Gas Dryer won't stay hot

Started by Chris

Replies: 3
Views: 4046
Last post August 21, 2007, 07:22:14 PM
by Pegi
Kenmore dryer door won't shut!

Started by krisncameron

Replies: 8
Views: 13152
Last post April 29, 2011, 08:21:47 PM
by evesnlm
Kenmore Dryer Model 110.76660100 Heater wires burned

Started by gwilli

Replies: 2
Views: 4331
Last post January 16, 2008, 01:31:15 PM
by JWWebster
Sears Kenmore Dryer - Makes Rumbling Noise

Started by AJ

Replies: 0
Views: 3375
Last post January 04, 2008, 05:37:36 PM
by AJ