Very Old Kenmore Dryer

[hleebeard@sbcglo]

This dryer still works but I want to replace the two drum wheels, belt, front and rear seals and felt bearings.  I don't know part numbers for this old machine but I know old model number.   The model number is no longer listed by parts parts suppliers.  In the old sears repair manual it is the 29" wide type A with the wide drop down door with round opening and the lint filter on the top right.  How do I know I am getting correct parts to do this job?

If you know the Sears or Kenmore part numbers that would help me much.

Best Regards,
Lee

Model 6508923WOD

[whirlpooltech]

Hi,

If you got that model number from the manual you may want to look at the model/serial number tag on the dryer itself.

Chances are the model/serial number tag is behind the door so just open the door and take a  look for the model number.

If you did get the model number from the dryer itself I believe if you take a second look you may notice a 110. in front of the numbers you posted, so the full model number maybe 110.6508923WOD

I want to replace the two drum wheels, belt, front and rear seals and felt bearings.

These are very common parts and if you take it apart and just look at them you may see part numbers on the old belt and drum wheels, but in any case I searched for parts at http://RepairClinic.com using 110.6508923WOD and got these parts listed.

http://www.repairclinic.com/Appliance-Parts?s=t-110.6508923WOD-%3d%3d

[viking351]

I have in stock seal#239087 (retail $39), roller wheel set of 2 (retail $25) and idler pully#691366(retail$16).

total retail $80 you can have them for $50.

I accept paypal.

viking