need service manual

[kellonnie]

need service manual

Model zfsb23drg

[JWWebster]

Kell  what you done got into now? Whats it doing?

[kellonnie]

lol, was just delivered, its not cooling on frig side freezer seems to be cooling....

[JWWebster]

Does it look like it has a damper to supply cold air from the freezer?

[kellonnie]

ummmmm.....let me check

[kellonnie]

yep

[kellonnie]

compressor is working, all fans working, lights working, but freezer is only getting to 60 and frig says 92

[kellonnie]

found the manual, says it needs 24 hours to stabilize.....

[JWWebster]

Is this one you fixing for somebody or ya got is at auction/trashpile pick?

[kellonnie]

bought it from a guy....its slowly cooling freezer is at 54 and frig is at 78.....prolly be faster if i left it alone huh?
i bought 4 one works great, this one, one is missing compressor fan and the last one, well one of the prongs on the compressor is stuck in the start relay....

[JWWebster]

It takes a couple of days for an ice box to get down to operating temp. The one that is working is that the one you put the relay on? Ok I am going back to the hospital in a minute to stay all night. The 3rd night in a row I ain't had a beer. Its about to kill me.   Whats worse is I ain't got my computer up there. Dang I am addicted.

[kellonnie]

NO THE OTHER ONE IS SOMEONE ELESES..

[kellonnie]

need service manual, its different from profile because the dampers are at the bottom behind custom cool drawer, there is a desupply damper and a damper. they are incased in a plastic box that the cover comes off, i cannot figure out how to get the cover off. freezer freezes but frig only gets to 59.there is nothing but clean wall at top where damper on profile is

[Repair-man]

To get the center cover off, remove the shelves first, then pry the lower right and left edges of the center escutcheon until it snaps off, working your way upward. Inside this cover is a damper and a  5 volt DC fan motor for the FF side. This whole piece comes as a kit, damper, motor and all. Did one last week.

Your freezer should have gotten down to 0  within 22 hours. You also have sealed system issues. Describe the frost pattern on the evaporator coil.

[kellonnie]

freezer did get to 0 frost pattern was even.having trouble with back left corner where it it rounded.