Kemore washer, first an oil leak, now it doens't spin

[kathy5553]

Hi,
I would like to see if I can save my washer. First it developed an oil leak. I'm guessing it's some sort of transmission fluid. I continued to use it because I didn't have time to look at it. (work, school, life in general) Then it developed a very loud banging noise (similar to when it's off balance, but it wasn't off balance) then quit spinning altogether. I've fixed many things on my own, but never a washer. Suggestions on what to look at first would be great.
Thank you!
Kathy

Model 110.23912100

[JWWebster]

The 2 most common problems is the lidswitch and the coupling. This video shows how to get into the machine

[JWWebster]

Here is an interesting video on lid switch replacement

[JWWebster]

Here is a great video that shows how to replace that pesky drive coupling

[JWWebster]

Do them checks first. If all of that is good we can go a little deeper. Nothing is hard about repairing these washers.

[kathy5553]

Thank you! I plan to check the first two things out this weekened...