Author Topic: Kenmore/Whirlpool Electric Dryer  (Read 1569 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 556
  • Country: us
Kenmore/Whirlpool Electric Dryer
« on: June 11, 2010, 12:23:52 AM »
 The dryer ran all night on auto dry. The timer was stuck on the cool down part of the cycle. The next load was put in and the dryer wouldn't start. The thermostats and heater all checked ok. What I found was the black wire coming out of the terminal block burned off. I patched up the lead and the dryer works fine now. There were 253 volts at the outlet. The incoming power at the terminal block was 243 volts with the heater on and 253 volts with the heater off. My questions are: Is this normal? What are the voltage tolerances? What causes a main power wire to burn? (the terminal was not loose). Could there be an underlying problem that will make this happen again?

Model 110.96586200

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore/Whirlpool Electric Dryer
« Reply #1 on: June 11, 2010, 08:15:33 AM »
The terminal might have vibrated loose and burned up.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Whirlpool/Kenmore Electric dryer top thermal fuse blow/wire burnt

Started by Washaman

Replies: 6
Views: 2394
Last post October 12, 2011, 12:54:53 PM
by Washaman
Video: How to check voltage at cord on a Whirlpool electric dryer.

Started by AJ

Replies: 0
Views: 9481
Last post August 06, 2007, 05:57:19 PM
by AJ
Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 4849
Last post August 07, 2007, 08:21:33 AM
by AJ
Kenmore Electric Dryer - Quits in mid-cycle

Started by GaryGG

Replies: 5
Views: 5347
Last post February 15, 2008, 04:07:19 PM
by JWWebster
Kenmore 70 series electric dryer...wont heat

Started by lalakelley

Replies: 53
Views: 41348
Last post November 24, 2011, 02:40:03 AM
by RegUS_PatOff
Kenmore electric dryer no heat

Started by pcornelius

Replies: 3
Views: 5049
Last post May 30, 2008, 11:44:50 AM
by RegUS_PatOff