Author Topic: KENMORE WASHER 60 series  (Read 13959 times)

Offline amnesty

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 5
KENMORE WASHER 60 series
« on: March 04, 2008, 07:46:38 PM »
 :-\ Well im confused and frustrated with my washer, 110.92060110. Its old and now it wont spin and rince! I turn the knob manualy and it works on one cycle :o
So, I know it can still rince and spin but it just wont when it sapposed to.
I been using it that way for a fiew months  ;)
However it takes forever and was gonna get a new washer. I dont think I need one, what do you think I can do about fixing mine and were do I get the parts? :D
Thank you for your help with my dryer a fiew months back!
Still works good I fixed it with your help O0

Model 110.92060110
« Last Edit: March 06, 2008, 12:28:44 PM by amnesty »

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: KENMORE WASHER 60 series
« Reply #1 on: March 04, 2008, 07:57:39 PM »
Hi amnesty,

Could you check your model number again.
I think it maybe missing some numbers.

Would there maybe be a 110. in front of them other numbers?


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: KENMORE WASHER 60 series
« Reply #2 on: March 04, 2008, 10:16:19 PM »
110.92060110 add a 110. to any kenmore model number(washers and dryers whirlpool) It is a direct drive model. You say you can make it spin  by manually manipulating the the washer. I hear ya. That has got to be the timer. It will do all the funnctions but you just gotta figure out how. I was leaning on one one time. Literally leaning on the lid and messing with the timer to make one spin. I noticed the lid was loose. It was not catching the striker to the lid switch like it was supposed to.  Is your lid loose? if it ain't  I would say replace the timer.
« Last Edit: March 06, 2008, 12:16:59 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline amnesty

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 5
Re: KENMORE WASHER 60 series
« Reply #3 on: March 06, 2008, 11:38:32 AM »
model# 110.92060110
here is the whole model # sorry about that.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: KENMORE WASHER 60 series
« Reply #4 on: March 06, 2008, 12:19:00 PM »
If you can move the timer around and everything works, then I would say the timer motor is not advancing. You could try oiling it, but it probably needs replacement.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline amnesty

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 5
Re: KENMORE WASHER 60 series
« Reply #5 on: March 06, 2008, 12:34:32 PM »
So, seen a video an how to get to the timer. Do you have one for kenmore or are they all pretty much the same?
If there is a wideo what video do you recamend?

Im going to try and take a look at my timer today. Also were do I oil it?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: KENMORE WASHER 60 series
« Reply #6 on: March 06, 2008, 02:40:27 PM »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: KENMORE WASHER 60 series
« Reply #7 on: March 06, 2008, 02:48:23 PM »
Once you flip up this console then the timer is easily accessed. The knob unscrews then you remove the dial indicator(escrution) this will expose the 2 5/16th inch hex heads that hold the timer in place. after these 2 are removed the timer simply has a quick disconnect. If you have a credit card you might can send the timer to be rebuilt to midwest timers in Michigan. Midwest Timer Service, Inc.
4815 N. M-63
Benton Harbor, MI 49022-9533
Phone 269-849-2800
   
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Kenmore 80 Series Washer

Started by shawnrconnelly

Replies: 5
Views: 5976
Last post October 25, 2007, 09:46:52 AM
by Pegi
kenmore 80 series washer

Started by buddyray

Replies: 2
Views: 6598
Last post April 19, 2008, 06:01:05 PM
by RegUS_PatOff
Kenmore 80 series washer

Started by KenOH98

Replies: 16
Views: 24701
Last post January 01, 2009, 09:28:08 PM
by bal62958
Kenmore 80 series washer..apparently a tool of the devil

Started by MamaD

Replies: 3
Views: 4258
Last post November 25, 2013, 05:25:19 PM
by fairbank56
Sears Kenmore HD80 Series Washer Skipping Rinse Cycle

Started by rljulian

Replies: 2
Views: 4262
Last post January 14, 2009, 08:07:55 AM
by Mr. Fix-It
kenmore 70 series washer not spinning

Started by snault80

Replies: 5
Views: 14089
Last post December 08, 2008, 05:50:35 PM
by Repair-man