Author Topic: whirlpool utlicare 2 wont agitate or spin but will drain water - grinding noise (Read 3320 times)

NEHoss24 · « **Reply #15 on:** June 07, 2010, 09:37:09 PM »

Sounds like a plan 2000 mile round trip for a 200 part but the beer would be great

Thanks again I will update once new transmission is installed

NEHoss24 · « **Reply #16 on:** June 09, 2010, 08:09:10 PM »

all better just one question how tight should the agitator bolt be? what happens if to tight or to loose?

JWWebster · « **Reply #17 on:** June 09, 2010, 08:38:25 PM »

Over tighten it and the bolt will mess up the rubber washer. Just snug it up dude.

NEHoss24 · « **Reply #18 on:** June 09, 2010, 08:57:43 PM »

yup ruined the rubber washer alright

had a rubber washer that worked perfect to replace it though

Thanks Again, the washer is running, the wife is happy so therefore I am happy.

JWWebster · « **Reply #19 on:** June 09, 2010, 09:44:50 PM »

You can buy the bolt with the rubber washer which is a pretty hefty one fer $4.2o last I looked, which was a long time ago.

NEHoss24 · « **Reply #20 on:** June 09, 2010, 10:11:38 PM »

going to get one tomorrow this was a temp fix so I can tackle the 5 days of laundry pile up

ApplianceJunk.com