Kenmoore Front Load Waher 110.45962400 will not spin or drain.

[ch3ris]

A bit puzzling -  just stopped spinning and won't drain.    Any ideas?

Model 110.45962400

[whirlpooltech]

110.45962400 KENMORE ELITE Front Load Washer. Manufactured by Whirlpool.

The first thing I would check is the water pump. I find a lot of crap in the water pumps of these front load washers. If the water can not drain it will not be able to spin.

You can remove the toe plate below the door and the water pump sits front center.

[whirlpooltech]

I was just reading a old post of yours from 2008 at this URL.

http://appliancejunk.com/forums/index.php?topic=2210.0

What did you do to repair it then?

[ch3ris]

Found the problem.  A sock stuck high up the black drain hose.  I squeezed the hose starting at the bottom and worked my way up until water was released and the sock came floating on to the floor. 

thanks,

Chris

[whirlpooltech]

 

Would be cool if you could update your post from 2008 to let us know what you found wrong with your washer back then too.