Coils installed. Tested only slightly different then old ones. Ohms tested all themostats, thermal swithces, radiant switch. All had about 1 ohm, except for 1 thermostat. It has 4 wires, 1 pair had 1 ohm, the other had I think like 600 ohms.
Any way with the new coils, lit right up, after a few start and stops, had a few missfires (igniter lit but no flame.) I did how ever have the gas smell like when the radiant sensor failed. Seems if you wait a minute or so between start stops, Lights everytime.
Thanks for the great advice. Let me know if you think the 4 pin/plug thermostat is an issue or if I should still consider radiant sensor?