dle9577wm service manual

[kellonnie]

need manual plz..

[JWWebster]

LG
Whats the complaint Kell?

[kellonnie]

thanks jw, but i cannot get it to open.....

[kellonnie]

oh i need to change the rollers but i just wanna look at how to take apart, im prett y sure its pretty standard for lg but i just wanna get a visual before i get there. sometimes it just makes it faster.

[JWWebster]

Lets see...To disassemble remove the top first by removing screws in rear. To take off the control remove to screw on each side of the back. All connectors are color coded. Cannot screw up reassemble.Lift control out and up. Control board has 4 screws and is replaced as a unit. Keep the selector knob.
Removing and reversing the door
Remove the screws from opposite side and then remove the latch pull out the latch no wires are there. Take the door off and reverse it then replace the latch and shorter screws for extra holes.
Remove the front:
Disconnect the dryerlight and door switch wires. Move harness out yer way. Remove 2 screws at the base of the door opening and 4 screws along the top. Tip the panel to the front and lifts off. Next remove the top bracket 2 screws each end. Lift brace up and off.
To remove the shroud/panel 4 screws are removed and lifted up and pulled forward. Disconnect the wire to the humidity sensor.
Remove the belt from idler and yank the drum out. (The belt goes under the tensioner then over the pulley then release it and the spring holds everythang in place like a DOT dryer.) The grooved/ribbed surface goes to the tub side. This is a dot dryer pic. The innards of a LG dryer are basically the same. click pic to enlarge

[kellonnie]

exactly how i thought, after taking out the screws from the back for the top are there clips holding the top?

[JWWebster]

No you just slide the top and lift off

[kellonnie]

sweeeeettttttt thanks

[JWWebster]

I have a 30 gig hard drive full of manuals, you need to get a laptop and take it with you to the job. When you get in a tight just ask. Or better yet just TEXT me (dont call, I won't answer) and ask me.

   251-472-7213 that's anybody, not just kell. Text only, no calls pwease

I will link manuals from google docs on request using this website, or a new website yet to be determined, or text back, I don't know yet, just got the idea. What do ya think?

[kellonnie]

added you to my phone....thanks

[Mr. Fix-It]

That looks like a lot of work to change a belt or roller. Had a Samsung that was like that, way over engineered.

[kellonnie]

lol yeah it does but once you get into it its not so bad, definately not a quick thing though