dishwasher control pannel not responding

[michael]

on the control pannel pots&pan & heated dry lights blinking also beeps about every 30 or 40 seconds with door open or closed on will not change settings or will not start

Model gld5800lww

[AJ]

I don't see many GE dishwasher myself. About how old is this dishwasher?

Maybe on of the other technicians can chime in with there thoughts about what they think is wrong.

[Mr. Fix-It]

Look for a tech sheet under the kickplate for error codes (blinking lights etc.). If not try turning off the power and let it sit for a bit before turning back on and see if it resets. Then I would check the operation of the 2 doorlock switches in the handle.

[michael]

thank you for replying  the washer is 4 years old I can hold down on the switch were to day latches and it will go to drain mold I held down on this for about 30 sec to see if it would finish the cycle but no respond I have turned power off and back on but go's right back to same mold I have unplugged the touch panel from inside and back still same thing help!!!!!

[michael]

I have looked at the door switches took little arm out with the spring on it put it back in system started working running now with main door down its going threw cycle maybe the arm was out of place ? but when put back together both doors it will not start the lights did stop blinking they stay on is this alignment thing with the door switch?

[Mr. Fix-It]

Sounds like there is a problem with the latch assembly I would replace it. If you don't own a meter and know how to use it this is all guesswork.

[michael]

thank you very much you've been most helpful and thank you for your time.

[JWWebster]

How to use voltmeter

[michael]

thank you for the voltmeter page. I lucked out with spring between the stwiches. just out of place.hopefully we'll see the next time wife dose dishes.Its either going to be its working or honey this thing ain't working lol. thank you so much for your help and time michael.