Forum > Washer Repair

Frigidiare Kenmore Front Load Washer Inner Tub & Tub Bearing Replacement.

(1/2) > >>

AJ:
Check out the attached pdf file for step by step instructions.

BrntToast:
done a bit different than we do em, but congrats on the ingenuity

i'll have to find a customer that will record me doin one for you, i can cut that time to 2 hours
if your not including the time it takes me to press in the new rear bearing, cause we do them on a rebuild basis, i take the old rear shell if not damaged as a core, if it was damaged they pay core too

on average a rear shell/inner basket takes me 1.5 hrs on concreate floor, 2 hours if i have to play with plywood to protect flooring

Repair-man:
After seeing the hassle of taking the boot off, etc. is it not possible to skip that part and just separate the 2 halves leaving the boot and front weights in place? Admittedly, it would be heavier, but less trouble to re-assemble and fewer steps in the repair.

If I am missing something, please let me know. I have not done one of these yet. (I can do the Neptune outer tub and spinner support replacement in under 1 hour)

AJ:

--- Quote ---done a bit different than we do em, but congrats on the ingenuity
--- End quote ---

I should note, these are not my photos or even my pdf file.
I got it online someplace long ago. Don't remember were.

If anyone would know I sure would be happy to give the creator credit.

AJ:

--- Quote ---i'll have to find a customer that will record me doin one for you,
--- End quote ---

That would be awesome!

Navigation

[0] Message Index

[#] Next page