Author Topic: Kenmore Elite Dryer  (Read 5862 times)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore Elite Dryer
« Reply #15 on: March 23, 2010, 11:11:39 AM »
If there is not 48 volts going to the relay for the motor after you release the start button, the board is bad.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore Elite Dryer
« Reply #16 on: March 24, 2010, 08:00:16 AM »
Did the Heater stay ON while holding the Start Button before you changed the Relays ?

Maybe both Relays are bad (or the Controller).

Try swapping them back, to see if the Heater stays ON while holding the Start Button.

If it's not a bad Motor Relay, it may be a bad Controller Board, not the Start Button
After leaving this Earth, "Do you want the smoking or non-smoking section?"


kenmore Elite Dryer will not start

Started by Jaytag

Replies: 5
Views: 10530
Last post February 24, 2009, 08:11:37 AM
by RegUS_PatOff
Kenmore Elite Dryer with Electronic Touch Pad

Started by Jaytag

Replies: 0
Views: 2706
Last post August 20, 2010, 09:44:03 AM
by Jaytag
Kenmore Elite quiet pak 9 HE4 gas dryer

Started by scottma978

Replies: 2
Views: 4920
Last post January 09, 2011, 11:33:37 AM
by JWWebster
Kenmore Elite Dryer not working

Started by hexxuss

Replies: 1
Views: 2188
Last post June 21, 2011, 09:44:49 PM
by JWWebster
kenmore Elite gas dryer

Started by Jos

Replies: 9
Views: 4263
Last post July 30, 2011, 10:36:03 AM
by JWWebster
Kenmore Elite HE3 11084832201 electric front load dryer not heating

Started by Mitchell

Replies: 4
Views: 3656
Last post August 03, 2012, 08:42:39 AM
by dab147315