Author Topic: Harness Trouble Help please.  (Read 1905 times)

Offline DaveTech

  • VIP Member
  • Member Since: Mar 2010
  • Posts: 16
Harness Trouble Help please.
« on: March 07, 2010, 09:43:37 PM »
Hi, this is DaveTech. The harness that plugs in to the icemaker is receiving 107 vac. Can the motor of the icemaker run at 107 vac or do I need a minimum of 115 vac?

Thank you very much,

DaveTech

Model kscs25inss00

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Harness Trouble Help please.
« Reply #1 on: March 07, 2010, 09:51:48 PM »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline DaveTech

  • VIP Member
  • Member Since: Mar 2010
  • Posts: 16
Re: Harness Trouble Help please.
« Reply #2 on: March 07, 2010, 09:55:24 PM »
Ok I put a brand new icemaker but the harness plugging into the icemaker has 107 vac not 120 vac. Can we run the icemaker on 107 vac, since the icemaker is brand new?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Harness Trouble Help please.
« Reply #3 on: March 07, 2010, 09:57:51 PM »
Try it. It might not harvest too fast.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline DaveTech

  • VIP Member
  • Member Since: Mar 2010
  • Posts: 16
Re: Harness Trouble Help please.
« Reply #4 on: March 07, 2010, 09:59:26 PM »
Alright, the machine did not run on 107 vac. Is the main board possibly the problem?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Harness Trouble Help please.
« Reply #5 on: March 07, 2010, 10:13:59 PM »
how you gonna make it run without letting it get get down to freezing. Its not been that long
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline DaveTech

  • VIP Member
  • Member Since: Mar 2010
  • Posts: 16
Re: Harness Trouble Help please.
« Reply #6 on: March 07, 2010, 10:17:34 PM »
I had a paper clip and I jumped it from T and H and the motor is not running. Mmmm maybe because we have 107 vac?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Harness Trouble Help please.
« Reply #7 on: March 07, 2010, 10:35:38 PM »
Might be. Are you on a generator?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Harness Trouble Help please.
« Reply #8 on: March 08, 2010, 05:44:37 AM »
After looking at the wiring diagram on the TECH SHEET, I conclude that if there is low voltage to the icemaker, it is coming from the Receiver board as demonstrated in the diagram.

On this board, you can use a paper clip to jumper terminal 3 to terminal #4 (Bk/Wht) to bypass the board and send voltage to the L and N terminals of the icemaker. (door switch closed)

If the icemaker runs (paper clip in T and L) then replace the optics kit.
« Last Edit: March 08, 2010, 05:51:39 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

no power to ice maker harness model # fridge 106.56532400

Started by savitbound

Replies: 5
Views: 2382
Last post June 11, 2010, 11:54:12 PM
by krazytech
Trouble with compressor fan for Samsung refrigetor

Started by guru1221

Replies: 1
Views: 974
Last post September 27, 2012, 11:28:23 PM
by AJ
Coveted Evaporator Wire Harness for KitchedAid Built-In

Started by fixyourboard

Replies: 0
Views: 287
Last post May 21, 2013, 11:54:29 AM
by fixyourboard
Ice level Optics board harness

Started by jstaylor954

Replies: 0
Views: 269
Last post July 18, 2013, 04:38:09 PM
by jstaylor954
MAYTAG REFRIGERATOR NO POWER TO ICEMAKER HARNESS

Started by Blaiser

Replies: 7
Views: 795
Last post January 07, 2014, 08:23:29 AM
by dab147315
upright freezer trouble

Started by patdaddy

Replies: 2
Views: 367
Last post February 17, 2014, 09:01:54 AM
by dab147315