Frigidaire freezer

[zepold59]

Frigidaire FFU20FC4AW1 Freezer. Checked the 3 pins on my compressor. From top to bottom on 1 side read 6.4 ohms. the other read 3.0, while the 2 at bottom read 9.3. Could this be a bad compressor? The compressor makes a buzzing noise then after a while it stops and doesn't cool.  Also should the capacitor connected to the relay have continuity.

[magician59]

The compressor is fine. The trouble is probably the start relay or the overload protector.

[jumptrout51]

The best way to read any capacitor is with a digital capacitor meter.
I have found very few refrigerator capacitors that read bad.
The problem as stated is most likely the relay/overload device.