Author Topic: kenmore front load washer  (Read 2003 times)

Offline daac

  • VIP Member
  • Member Since: Feb 2010
  • Posts: 2
kenmore front load washer
« on: February 28, 2010, 02:52:48 PM »
Hello,  I just replaced the bellows, the old one was shredded, I think my shock absorbers might also be worn?? The drum sits very low when filled with clothes and water. Now there are small tiny flecks of rubber clinging to the bellows, almost as if its rubbing some where. I just want to avoid damaging the new bellows and just throw my $$ away. If anyone has any advice I'd appreciate it!!! The washer is about 8-10 years old.

Thanks a bunch

Model 110.42822203

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
Re: kenmore front load washer
« Reply #1 on: March 01, 2010, 05:10:07 PM »
I raise the front of the unit very little so the tub does not rub against the bellows.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: kenmore front load washer
« Reply #2 on: March 01, 2010, 05:51:33 PM »
Those shocks need to be replaced every 4-5 years as a rule. Betcha they didn't tell ya that at Sears   :)

You've got far worse problems that that, amigo. Your po' little spinner basket assembly needs to be replaced. How do your spin bearings sound when the tub is going to town?
« Last Edit: March 01, 2010, 05:55:13 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: kenmore front load washer
« Reply #3 on: March 01, 2010, 06:21:33 PM »
I agree with repairman as you most likely have got some bigger issues.  I have seen those spindles and bearings fail to the point were the inner tub has destroyed the bellow, and outer tub assy.  Grab a hold of the inner tub by the baffles and if you have alot of play up and down, or front to back, you should get your shoes on and head down and pick out a new washer.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

 

Frigidiare Kenmore Front Load Washer Inner Tub & Tub Bearing Replacement.

Started by AJ

Replies: 5
Views: 7236
Last post March 03, 2008, 03:56:05 AM
by BrntToast
Kenmore front load tumble action washer

Started by MajorApp

Replies: 2
Views: 3944
Last post May 24, 2008, 10:51:35 AM
by MajorApp
Kenmore (Fridgidaire) Front Load washer

Started by 8857mama

Replies: 1
Views: 2638
Last post September 24, 2008, 11:52:52 AM
by Repair-man
Kenmore Frigidaire front load washer - No Spin

Started by jpn43

Replies: 8
Views: 6298
Last post September 01, 2009, 08:52:36 AM
by JWWebster
kenmore front load washer, soil selector touch button unresponsive

Started by helene

Replies: 1
Views: 1736
Last post September 07, 2009, 11:05:47 AM
by whirlpooltech
Kenmore Front Load Washer Won't Spin

Started by lilpig

Replies: 1
Views: 5195
Last post December 21, 2009, 11:39:04 AM
by Repair-man