Get Answers to your Appliance Repair Questions

Author Topic: water slow  (Read 2082 times)

Offline JPG

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 192
water slow
« on: February 11, 2010, 03:13:40 PM »
Hi this is a kitchenaid french door fridge, but actually its a maytag I think w/ a kitchenaid logo on it.  The water out the dispenser is real slow so I replaced the water valve and its the same thing. Do these filters actually come close to stopping water flow if there dirty???? I got great pressure to it, I know the ge fridges will clog up but I dont know anything about this maytag/kitchenaid fridge?  tks   Joe

Model kbfs25evbl00

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8804
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: water slow
« Reply #1 on: February 11, 2010, 04:23:18 PM »
You need to change that water filter and depending on your water source and how long that filter been there you would need to change that water valve. By the way that is why your ice maker keeps calling for water. It is looking for the correct resistance reading so it will know the mold is full. This is NORMAL.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL


slow water being dispenced

Started by JPG

Replies: 3
Views: 2484
Last post October 04, 2010, 09:54:40 PM
by mcdermit
Whirlpool Gold Refrigerator - Slow Water Dispenser

Started by Redfish30

Replies: 7
Views: 13266
Last post December 02, 2012, 02:46:49 PM
by JWWebster
Repair Guide: Whirlpool Refrigerator - Water in bottom of fridge under drawers.

Started by AJ

Replies: 3
Views: 108255
Last post July 08, 2007, 12:04:06 PM
by curtis
Video: Testing - Connect and disconnect a push-in ice maker water fill valve

Started by AJ

Replies: 0
Views: 22119
Last post July 30, 2007, 05:53:38 PM
by AJ
Kenmore refrigerator - how remove ice/water dispenser front panel

Started by Marvster

Replies: 1
Views: 34874
Last post August 11, 2007, 08:06:07 PM
by AJ
No water from dispenser-ice maker working-replaced valve inlet

Started by Evan

Replies: 2
Views: 7047
Last post August 18, 2007, 05:17:53 PM
by Evan