Author Topic: Kenmore electronic 90 series washer bleach and fabric dispenser stopped working  (Read 2810 times)

Offline Mykl711

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 35
bleach and fabric dispensers have  stopped working,   it has been working just fine,  just stopped all at once.......suggestions please  :)

Model 110.26954690

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Most electronic failures, such as  light bulbs, go out "all at once".

Your washer has a couple of water mixing valves on it that other machines do not. These are specifically designed to fill the various dispensers and are controlled by the electronic control board in the console. The valve shown below, for example is a 3-way valve, costing just under $100. Since the dispensers stopped working suddenly, we can conclude that the valve is bad or the control board is no longer sending voltage to it. You'll have to whip out your trusty volt meter and locate the wiring sheet in the top console to find out which it is.

 
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline Mykl711

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 35
Hello again Mr Repair man,   another questions for ya,  I found the tech sheet under the control panel, and it has a diagnostic test that I could put the washer thru, part of the test was the fill values, and dispensers and so forth.   I ran the test and the dispensers worked fine.....hummmmmmm   now I am thinking  what do I check,   I can still run the ohms test, but they worked perfect during the diagnostic test....

so if they work during the test and don't work during the cycle, 
the board ???

Offline Mykl711

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 35
Ok just found the test for the "microcomputer"  I will run that and see what's up   any other suggestions are welcome also.
thanks again !

 

Kenmore 80 series washer stopped working

Started by fresnorich

Replies: 20
Views: 10357
Last post October 04, 2010, 11:42:30 PM
by mslye
Kenmore 80 series washer just stopped

Started by jackbequik

Replies: 10
Views: 5767
Last post September 08, 2009, 10:07:18 AM
by JWWebster
Kenmore 70 Series washer making burning smell and has stopped draining

Started by imac

Replies: 10
Views: 5155
Last post April 08, 2010, 08:25:02 PM
by JWWebster
Kenmore washer series 80 just stopped

Started by shellbayer

Replies: 11
Views: 3007
Last post May 06, 2010, 02:48:10 PM
by shellbayer
Kenmore 80 Series Washer

Started by shawnrconnelly

Replies: 5
Views: 4021
Last post October 25, 2007, 09:46:52 AM
by Pegi
KENMORE WASHER 60 series

Started by amnesty

Replies: 7
Views: 11732
Last post March 06, 2008, 02:48:23 PM
by JWWebster