Author Topic: Maytag Neptune F/L Outer tub and bearing  (Read 3280 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 555
  • Country: us
Maytag Neptune F/L Outer tub and bearing
« on: February 03, 2010, 10:42:48 AM »
 Can I swap the outer tub and bearing from a Maytag Neptune MAH5500BWQ with a MAH4000AWW?

Model MAH4000AWW

Online RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 708
  • Country: ca
Re: Maytag Neptune F/L Outer tub and bearing
« Reply #1 on: February 04, 2010, 06:05:06 AM »
Correct me if I'm wrong but I believe the outer tub for a MAH4000 has a hole in the back bottom left for the water level hose and the MAH5500 has the water level switch mounted on top of the pump. 

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 555
  • Country: us
Re: Maytag Neptune F/L Outer tub and bearing
« Reply #2 on: February 04, 2010, 06:17:23 AM »
 I haven't looked at the MAH4000 yet. I have a used MAH 5500. I'll have to look into it further.

Offline bobdell

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 4
Re: Maytag Neptune F/L Outer tub and bearing
« Reply #3 on: February 06, 2010, 09:53:11 AM »
Major, you didn't indicate why you needed to change outer tubs, but if it is due to seal and bearing failure,  I have done numerous bearing and seal replacements on these using seal kit #12002022 and 6206 and 6207 bearings with very good results.



Part # 12002022 Lip Seal Kit, AP4009088



 

Older Maytag Neptune Outer tub swap problem-HELP

Started by cds

Replies: 9
Views: 6729
Last post April 12, 2008, 04:45:26 PM
by cds
Maytag Neptune MAH4000AWW Bearing Replacement (loud noise during spin)

Started by TonyWilliams

Replies: 6
Views: 12124
Last post December 11, 2011, 09:51:57 PM
by AJ
Maytag Neptune Bearing Replacement Project.

Started by schaffersapplian

Replies: 10
Views: 9099
Last post January 10, 2012, 10:20:09 AM
by JWWebster
Maytag Neptune Spin Problems after Bearing Replacement

Started by johnny_a

Replies: 8
Views: 3639
Last post April 02, 2013, 08:17:35 PM
by tgoods
Maytag Neptune 6700 bearing removal and installation

Started by Cobra

Replies: 9
Views: 404
Last post November 13, 2014, 01:47:12 PM
by markcoby98
Bearing replacement in Maytag Neptune MAH5500BWW

Started by trooper1954

Replies: 2
Views: 104
Last post Today at 01:19:28 AM
by tgoods