Author Topic: Maytag Neptune F/L Outer tub and bearing  (Read 2984 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 547
  • Country: us
Maytag Neptune F/L Outer tub and bearing
« on: February 03, 2010, 10:42:48 AM »
 Can I swap the outer tub and bearing from a Maytag Neptune MAH5500BWQ with a MAH4000AWW?

Model MAH4000AWW

Online RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 675
  • Country: ca
Re: Maytag Neptune F/L Outer tub and bearing
« Reply #1 on: February 04, 2010, 06:05:06 AM »
Correct me if I'm wrong but I believe the outer tub for a MAH4000 has a hole in the back bottom left for the water level hose and the MAH5500 has the water level switch mounted on top of the pump. 
Been at this game for 38 years

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 547
  • Country: us
Re: Maytag Neptune F/L Outer tub and bearing
« Reply #2 on: February 04, 2010, 06:17:23 AM »
 I haven't looked at the MAH4000 yet. I have a used MAH 5500. I'll have to look into it further.

Offline bobdell

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 4
Re: Maytag Neptune F/L Outer tub and bearing
« Reply #3 on: February 06, 2010, 09:53:11 AM »
Major, you didn't indicate why you needed to change outer tubs, but if it is due to seal and bearing failure,  I have done numerous bearing and seal replacements on these using seal kit #12002022 and 6206 and 6207 bearings with very good results.



Part # 12002022 Lip Seal Kit, AP4009088



donate
$1, $2, $5, $10, $20, $50
 

Older Maytag Neptune Outer tub swap problem-HELP

Started by cds

Replies: 9
Views: 6177
Last post April 12, 2008, 04:45:26 PM
by cds
Maytag Neptune MAH4000AWW Bearing Replacement (loud noise during spin)

Started by TonyWilliams

Replies: 6
Views: 10964
Last post December 11, 2011, 09:51:57 PM
by AJ
Maytag Neptune Bearing Replacement Project.

Started by schaffersapplian

Replies: 10
Views: 7925
Last post January 10, 2012, 10:20:09 AM
by JWWebster
Maytag Neptune Spin Problems after Bearing Replacement

Started by johnny_a

Replies: 8
Views: 2725
Last post April 02, 2013, 08:17:35 PM
by tgoods
Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 7427
Last post February 09, 2013, 07:41:01 AM
by def
Maytag Neptune MAH4000AWW - No Spin.

Started by larry

Replies: 39
Views: 59088
Last post February 21, 2011, 01:22:14 PM
by bwhelan