Author Topic: GE Profile 30" Error F0  (Read 4595 times)

Offline dfgcalle

  • VIP Member
  • Member Since: Feb 2010
  • Posts: 1
GE Profile 30" Error F0
« on: February 01, 2010, 08:36:38 PM »
I have GE Profile 30" Gas Range Dual and main panel show error F0. I disconnect power for all night but when it came back show the same error. I can't use the oven. Sometimes I can use some fuctions but it came to lock again when error show back. I would like to know how I can test if the problem will be tha glass controll or the membrane panel
Thanks

Model JGB918SEL3SS

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
Re: GE Profile 30" Error F0
« Reply #1 on: February 02, 2010, 08:34:16 PM »
I could not find your model,however if you go to the fault codes at the top it explains how to test if it is the touch pad or control board.most of the time it will be the control ,however check to make sure.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: GE Profile 30" Error F0
« Reply #2 on: February 11, 2010, 07:11:29 AM »
GE fault codes indicate the following:
 F0 or F7
   
Shorted Clear/Off Key due to membrane switch, control or connector
   
Shorted key panel membrane switch; Check Electronic Range Control (ERC)
Take a Kid fishing.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: GE Profile 30" Error F0
« Reply #3 on: February 11, 2010, 08:04:22 AM »
A little tibit for you...
F-0 is always a bad clock
F-7 is most always a bad touch pad (or in rare cases, corroded ribbon connections)
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: GE Profile 30" Error F0
« Reply #4 on: February 11, 2010, 12:00:00 PM »
 O0
Take a Kid fishing.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Profile 30" Error F0
« Reply #5 on: February 11, 2010, 12:47:21 PM »
I would like to add THIS
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1172
Re: GE Profile 30" Error F0
« Reply #6 on: February 11, 2010, 07:13:52 PM »
Me to O0 Thank you

 

error code "BAKE"

Started by Crow

Replies: 3
Views: 1482
Last post January 15, 2009, 10:25:08 PM
by Crow
GE Profile Gas Range F2 error

Started by jackie999

Replies: 5
Views: 5577
Last post April 26, 2010, 03:05:03 PM
by jumptrout51
GE Profile range # JS968S0K2SS error code FA!

Started by ChuckTalbot

Replies: 3
Views: 1143
Last post March 18, 2014, 09:59:41 AM
by LowSL2
GE Profile range error code

Started by br12950

Replies: 0
Views: 888
Last post May 20, 2014, 10:08:35 AM
by br12950
lg electric range: "start" button stopped working

Started by birch

Replies: 4
Views: 9591
Last post February 28, 2010, 11:28:41 PM
by john63
need 24" range

Started by marie

Replies: 1
Views: 1974
Last post March 09, 2008, 09:20:43 PM
by JWWebster