GE Profile 30" Error F0

[dfgcalle]

I have GE Profile 30" Gas Range Dual and main panel show error F0. I disconnect power for all night but when it came back show the same error. I can't use the oven. Sometimes I can use some fuctions but it came to lock again when error show back. I would like to know how I can test if the problem will be tha glass controll or the membrane panel
Thanks

Model JGB918SEL3SS

[niobrara]

I could not find your model,however if you go to the fault codes at the top it explains how to test if it is the touch pad or control board.most of the time it will be the control ,however check to make sure.

[jumptrout51]

GE fault codes indicate the following:
 F0 or F7
   
Shorted Clear/Off Key due to membrane switch, control or connector
   
Shorted key panel membrane switch; Check Electronic Range Control (ERC)

[Repair-man]

A little tibit for you...
F-0 is always a bad clock
F-7 is most always a bad touch pad (or in rare cases, corroded ribbon connections)

[jumptrout51]

 

[JWWebster]

I would like to add THIS

[niobrara]

Me to Thank you