Author Topic: MANUAL OR DIRECTIONS FOR REPLACING BEARING & SEAL HOUSING KIT  (Read 2138 times)

Offline JOHNW

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 2
I need to find step by step directions or a service manual for installing a bearing & seal housing kit (spin bearing) for a maytag top load washer
thanks

Model MAV7600AWW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: MANUAL OR DIRECTIONS FOR REPLACING BEARING & SEAL HOUSING KIT
« Reply #1 on: January 21, 2010, 06:32:13 AM »
Actually the complete instructions are packed in the bearing kit. Hope you have all the expensive special tools first!

« Last Edit: January 21, 2010, 06:38:38 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline JOHNW

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 2
Re: MANUAL OR DIRECTIONS FOR REPLACING BEARING & SEAL HOUSING KIT
« Reply #2 on: January 21, 2010, 10:04:17 PM »
i JUST PICKED UP MY SEAL KIT TODAY.  THERE ARE MINIMAL INSTRUCTIONS INCLUDED.  I WAS LOOKING FOR ADDITIONAL INSTRUCTIONS ABOUT PULLING THE EXISITNG BEARING, ETC.
i HAVN'T BEEN ABLE TO LOCATE A SERVICE MANUAL FOR THIS WASHER - ITS NOT THAT OLD (BOUGHT IN 2005), SO I THOUGHT THEY SHOULD BE AVAILABLE?

DON'T HAVE THE SPECIAL TOOLS NEEDED BUT HAVE SEEN THE SPECIAL SPANNER WRENCH AT THE APPLIANCE REPAIR SHOP AND PLAN ON FABRICATING A ROUGH ONE - HOPE THIS WORKS!

THANKS FOR THE REPLY.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: MANUAL OR DIRECTIONS FOR REPLACING BEARING & SEAL HOUSING KIT
« Reply #3 on: January 22, 2010, 05:11:25 AM »
Fabricate your own tools, huh? You gonna make the upper seal nut tool, the hub tool and the spanner?  Allrighty then....since you are so productive, there's no reason you shouldn't  have the manual to assist you. You may look at my copy of the manual HERE.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: MANUAL OR DIRECTIONS FOR REPLACING BEARING & SEAL HOUSING KIT
« Reply #4 on: January 22, 2010, 03:35:01 PM »
Don't forget, you need a spring tool as well    ;)
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: MANUAL OR DIRECTIONS FOR REPLACING BEARING & SEAL HOUSING KIT
« Reply #5 on: January 22, 2010, 09:55:10 PM »
JOHNW, If that machine is from 2005, the transmission is under warranty still, which comes with a seal kit.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

 

Maytag dependable care stem seal/bearing replacement

Started by michael o

Replies: 3
Views: 3035
Last post December 28, 2007, 12:08:21 AM
by AJ
Changing the Performa or Atlantis Tub Bearing and Seal

Started by Repair-man

Replies: 0
Views: 1321
Last post October 24, 2008, 06:37:17 PM
by Repair-man
Maytag Atlantis washer bearing and seal question

Started by grdnhappy

Replies: 1
Views: 3215
Last post November 10, 2008, 01:00:32 PM
by JWWebster
Replacing tub seal on washer, now what?

Started by FixItMyself

Replies: 2
Views: 1097
Last post November 21, 2008, 07:01:49 PM
by shieldcracker
cannot turn inner tub after tranny, bearing, and triple seal replacement

Started by jphilardis

Replies: 2
Views: 606
Last post January 17, 2012, 02:57:20 PM
by bigbuck
bocsh bearing & seal replacement

Started by bigbuck

Replies: 1
Views: 626
Last post January 26, 2012, 07:39:45 PM
by rego