Forum Index > Washer Repair

HR error code Maytag Washer

(1/1)

gkofc:
Unit has new board.It spins for a few mins. then stops with HR error code.Help please.

Model MAH8700AWW

Chrim510:
I have the same unit , and the same problem and more. Mine, after trying to spin faster the power would shut down. Will reset itself after a few mins. But after a few times it died. We decided to buy a new one but I tried one more time to fix it. With the washer plugged in, no display on front panel, i opened the rear panel and starts pulling the wires one by one. I heard a chime. Kept pulling wires until one blue wire gave. Slpiced it back together and the washer works fine. I recomend to do this while the front door is opened so drum would not turn. And be carefull!!!! Hope this help.

Navigation

[0] Message Index

Go to full version