Free Service - Appliance Repair Help & Troubleshooting

Author Topic: HR error code Maytag Washer  (Read 3968 times)

Offline gkofc

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 24
HR error code Maytag Washer
« on: January 14, 2010, 09:25:13 AM »
Unit has new board.It spins for a few mins. then stops with HR error code.Help please.

Model MAH8700AWW

Offline Chrim510

  • VIP Member
  • Member Since: Jan 2017
  • Posts: 1
Re: HR error code Maytag Washer
« Reply #1 on: January 10, 2017, 12:09:53 PM »
I have the same unit , and the same problem and more. Mine, after trying to spin faster the power would shut down. Will reset itself after a few mins. But after a few times it died. We decided to buy a new one but I tried one more time to fix it. With the washer plugged in, no display on front panel, i opened the rear panel and starts pulling the wires one by one. I heard a chime. Kept pulling wires until one blue wire gave. Slpiced it back together and the washer works fine. I recomend to do this while the front door is opened so drum would not turn. And be carefull!!!! Hope this help.

 

Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 11767
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
Maytag Neptune TL Washer UC Error Code

Started by TechnicianBrian

Replies: 0
Views: 30402
Last post October 14, 2008, 06:38:41 AM
by TechnicianBrian
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 19503
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 9530
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
LG Front Load Washer LE Error code

Started by TechnicianBrian

Replies: 43
Views: 127965
Last post March 12, 2012, 08:01:50 AM
by roodog
Whirlpool Duet Washer F5 Error Code

Started by TechnicianBrian

Replies: 2
Views: 17380
Last post October 05, 2008, 08:39:47 PM
by TechnicianBrian