Author Topic: Kenmore Electric Range - Oven Elements?  (Read 1928 times)

Offline gp7556

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 1
Kenmore Electric Range - Oven Elements?
« on: January 22, 2010, 09:02:36 AM »
I have a  Kenmore Electric Range 790.9442. The surface elements are working fine, but the oven is not. The Bake Pad functions work but the elements top and bottom are not activating (heating up) at all after the "beep". Is this an element(s) problem in which in needs replacement or is there something else I need to check? Any advise on trouble shooting will be appreciated. Thank you.

Gabe

Model 790.9442

Offline whjeffs

  • Technician
  • Member Since: Feb 2010
  • Posts: 54
Re: Kenmore Electric Range - Oven Elements?
« Reply #1 on: February 28, 2010, 04:17:59 PM »
Most common failure when neither bake nor broil elements heat is bad control board. Sometimes a shorted element can short out the control so before replacing the control check both elements for proper resistance readings.

Offline bakeray

  • Technician
  • Member Since: Jan 2010
  • Posts: 102
Re: Kenmore Electric Range - Oven Elements?
« Reply #2 on: March 15, 2010, 12:02:42 AM »
Also check the thermal cut out(s).  Just fixed a Bosch with the same problem. Bake, Broil and clean all showed working on the display but no element was getting hot.

 

Kenmore Electric Range-No Bake or Broil

Started by Gobbyparts

Replies: 10
Views: 6162
Last post February 23, 2009, 04:56:02 PM
by RegUS_PatOff
Kenmore Electric Kitchen Range Burner Overheat

Started by hsu201

Replies: 9
Views: 7344
Last post July 08, 2009, 05:41:52 PM
by jumptrout51
GE Electric Range w/ 4 Radiant Elements

Started by Cleve Dean

Replies: 4
Views: 2051
Last post July 31, 2009, 07:53:22 PM
by Cleve Dean
Kenmore Electric Range

Started by SearsSux

Replies: 6
Views: 2327
Last post October 18, 2009, 06:31:02 PM
by JWWebster
Sears Kenmore Smooth Top Electric Range - C880. Zapping (arcing?) sound at knob

Started by diyguy1000

Replies: 7
Views: 5603
Last post January 26, 2010, 04:02:19 PM
by JWWebster
1988 Kenmore Electric Downdraft Range

Started by Reduviidae

Replies: 3
Views: 2716
Last post February 15, 2010, 06:30:43 PM
by jumptrout51