Ok, it looks like this topic has been covered a lot, but want to make sure I am on the right page, before I run all over town getting parts I don't need.
Problem: Dryer works fine, but on occassion would trun off in the middle of a drying cycle. Finally yesterday it stopped running all together and will not start. There is power to the unit, because the drum light still works and so does the timer. Breaker on the house was not tripped. There are three temp settings. Delicate, Medium and High. Even on the delicate cycle the inside temp seemed high. I pulled the back off and it was very dusty. Cleaned that all out and no go. So based on this information would it be the thermal fuse or one of the heating elements?