365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Whirlpool oven error code E0 F2  (Read 19276 times)

Offline dean

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 1
Whirlpool oven error code E0 F2
« on: January 04, 2010, 10:11:47 AM »
My built-in oven began exhibiting problems with the clock not displaying. Before too long, most of the front membrane switches were not functioning.  The error code E0 F2 displayed which suggests the front membrane switch panel as the problem. I replaced the front membrane panel which solved most of the problems.

The problem of the clock not displaying remains, and the error code E0 F2 continues to return every minute.
I assume the problem is now the control board (4452241), which (of course) is no longer available.

Any suggestions?

Model GBS277PDQ1

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Whirlpool oven error code E0 F2
« Reply #1 on: January 04, 2010, 11:40:16 AM »
Yes, E0 F2 is a stuck keypad. You might get lucky by pressing all the keys several times at random and unstick it. If that does not work you need a new control.
Take a Kid fishing.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8793
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool oven error code E0 F2
« Reply #2 on: January 04, 2010, 11:52:19 AM »
You can send your board to fixyourboard.com
Fixyourboard.com info video
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline djm

  • VIP Member
  • Member Since: Jul 2011
  • Posts: 1
Re: Whirlpool oven error code E0 F2
« Reply #3 on: July 13, 2011, 03:49:46 PM »
I have a Sears Kenmore range that was made by Whirlpool, and it had the same error code.  Sears told me that the part (the glass touchpad) was unavailable.  (They also told me it was in stock, and on back order, but that's another story...)

Since I couldn't replace the touchpad, I bought a timer/controller, on the off chance it was a bad controller and the error was wrong.  The timer/controller didn't fix anything.

I then decided to disable the bad button.  I pushed every button on the panel, and all but one made the controller beep.  The one silent one was the down-hour control.  I don't need that, I can cycle around with up-hour.  I ended up cutting the connection on one of the tiny components associated with that button, and to my surprise it worked.

Photos on my web page, http://murdoch-sutherland.com/sears.html.  

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10091
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool oven error code E0 F2
« Reply #4 on: July 13, 2011, 05:15:03 PM »

I fixed your link so it was clickable....

Thanks for posting
Hope you find our site helpful.


Whirlpool Built-In Double Ovens Kitchenaid Built-In Double Oven F5 E1 Error Code

Started by fixyourboard

Replies: 1
Views: 5491
Last post February 05, 2011, 11:46:54 AM
by krazytech
Whirlpool oven error code E0 F2

Started by Bob Not a Repair Guy

Replies: 1
Views: 730
Last post March 15, 2015, 04:55:44 PM
by AJ
Whirlpool Microwave F2Q1 Error Code

Started by TechnicianBrian

Replies: 0
Views: 3618
Last post April 15, 2008, 09:57:53 PM
by TechnicianBrian
Whirlpool Polara Range Error Code

Started by TechnicianBrian

Replies: 5
Views: 11141
Last post December 29, 2008, 09:03:25 PM
by TechnicianBrian
Whirlpool Oven E1 F2 Error

Started by TechnicianBrian

Replies: 0
Views: 17622
Last post July 11, 2008, 07:59:01 AM
by TechnicianBrian
Error codes for whirlpool double wall oven

Started by decihlar

Replies: 1
Views: 6325
Last post April 12, 2009, 11:53:55 AM
by jumptrout51