Author Topic: LG Dishwasher (Read 13841 times)

JWWebster · « **Reply #45 on:** December 24, 2009, 01:48:03 PM »

JWWebster · « **Reply #46 on:** December 24, 2009, 01:55:35 PM »

Aylwardg · « **Reply #47 on:** December 24, 2009, 04:27:06 PM »

So it looks like were back to lookig for some bare wires again.
What should the ohm reading be on the drain pump?

JWWebster · « **Reply #48 on:** December 24, 2009, 05:31:04 PM »

Maybe something is inside the pump housing. Have you removed it yet and cleared the sump?

Aylwardg · « **Reply #49 on:** December 24, 2009, 05:34:46 PM »

Yes it was all clear. I blew the hoses out and everything... no obstructions at all.

JWWebster · « **Reply #50 on:** December 24, 2009, 05:50:31 PM »

Is that pump a 120 volt one? I would bench test it out of the machine. I would try to put 120 to it and see if it did its thang.

Aylwardg · « **Reply #51 on:** December 24, 2009, 06:09:28 PM »

I will try that over the holidays.
Have a great 2010

All the best
Glen

JWWebster · « **Reply #52 on:** December 24, 2009, 06:36:38 PM »

Maybe santa will brang you a new GE potslosher.

Aylwardg · « **Reply #53 on:** December 30, 2009, 02:08:46 PM »

Well .... no GE potsloshers under the tree!!

it looks like were back to repairing this LG junk.

Any fresh ideas over the holidays?

JWWebster · « **Reply #54 on:** December 30, 2009, 04:24:11 PM »

JWWebster · « **Reply #55 on:** December 30, 2009, 04:28:51 PM »

Maybe you oughta remove the controls and hunt for burned marks or loose wires or corroded connections.

ApplianceJunk.com