Author Topic: Whrilpool 9200  (Read 4481 times)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Whrilpool 9200
« Reply #10 on: December 27, 2009, 07:49:14 PM »
Nobody mentioned a tub bearing. You have a broken spinner basket support. See the following video:
Why Kenmore Washers Fail  (whirlpool too)

When it broke, the tub flopped around, likely damaging the outer tub, which is a whitish plastic material. In this case, you can order a new tub kit along with the new spinner basket and then you will have a new machine (mechanically speaking). Keep in mind that you also risk other repairs later down the road which are not related to this issue, so  this is why I hesitated to recommend a great expense on your behalf. If you are comfortable with the prices you find on the parts, there's no reason you can't replace the tub as well as the spinner while you're in there. It's all going to have to come apart the same way anyhow. If it were me, I would start disassembling it to see just what was damaged and what was not. You can't use it anyway.

Duet Manual
« Last Edit: December 27, 2009, 07:56:23 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline dougv

  • VIP Member
  • Member Since: Dec 2009
  • Posts: 7
Re: Whrilpool 9200
« Reply #11 on: December 27, 2009, 07:59:16 PM »
ok, what I didn't get was how the two joined/relationship to the plastic. i don;t have an issue with taking it apart just wanted to order what I thought would be needed. that way i could put it right back together. i'll disassemble and we'll see what's next. Thanks for your assistance   

 

WHRILPOOL WASHER BROKEN

Started by RMSEDAN

Replies: 6
Views: 2465
Last post September 23, 2008, 01:23:33 PM
by JWWebster
Kenmore (Whrilpool) washer Mod # 110.47512602

Started by Major

Replies: 5
Views: 2478
Last post December 23, 2011, 02:43:56 PM
by AJ
whrilpool waher noisy

Started by brothermal

Replies: 2
Views: 592
Last post April 15, 2012, 09:55:56 AM
by ubreakitifixit