Author Topic: stops at last spin cycle  (Read 1663 times)

Offline 4uzindian

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 37
stops at last spin cycle
« on: December 20, 2009, 07:49:25 AM »
washing machine stops sometimes at last spin and rinse cyle. i lift lid and then it continues it's normal cylce. could it be the lid switch? or the big control knob? i have a circut tester. other than that it runs just fine. newbie ???

Model kenmore 823 72110

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: stops at last spin cycle
« Reply #1 on: December 20, 2009, 08:05:29 AM »
This is a timer control failure (and one of the most frequent). Located under the knob and dial, it only requires that you remove 4 screws to do the whole repair, 2 on the outer front edge of the control panel and 2 under the knob. The timer is shown below.

"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline 4uzindian

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 37
Re: stops at last spin cycle
« Reply #2 on: December 20, 2009, 04:26:01 PM »
thank's for the speedy reply i'll search some sites for a good price. i'll be closing this post now. O0

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: stops at last spin cycle
« Reply #3 on: December 21, 2009, 06:36:27 AM »
I'll be opening the post now...

Are you deliberately going elsewhere for parts even though you got your help here? That's not exactly a proper way to show your appreciation for the help, much less support the hand that "feeds you". There is a parts lookup on the left to help you get the part at the best price along with the fact that you can always return the part if it does not solve the problem. Our free help is provided in order for you to use our recommended sponsors to get parts. That's why this is such a good deal for you as a visitor. Advice and parts in one site...what a bargain!  O0
« Last Edit: December 21, 2009, 06:47:53 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

Stops at Spin Cycle

Started by djp

Replies: 4
Views: 1496
Last post March 05, 2009, 07:01:36 AM
by djp
Stops at Spin Cycle

Started by dkhesser

Replies: 10
Views: 2645
Last post March 10, 2009, 04:59:40 PM
by JWWebster
GE washer stops mid cycle & wont spin out completely

Started by kstump27

Replies: 2
Views: 7635
Last post July 07, 2009, 06:23:24 AM
by Repair-man
cycle stops at spin

Started by frank2

Replies: 18
Views: 4693
Last post January 15, 2011, 08:51:21 PM
by RegUS_PatOff
GE Washer stops right before spin cycle is supposed to start

Started by oldguard

Replies: 5
Views: 3836
Last post May 23, 2011, 09:43:55 AM
by JWWebster
Kenmore washer stops at spin cycle 110.44836300

Started by browniiiz

Replies: 5
Views: 1565
Last post May 03, 2012, 08:13:35 PM
by jumptrout51