Free Service - Appliance Repair Help & Troubleshooting

Author Topic: kenmore 665.13929k010 no go  (Read 275 times)

Offline haroldshell

  • VIP Member
  • Member Since: Sep 2015
  • Posts: 71
kenmore 665.13929k010 no go
« on: February 12, 2016, 01:10:48 PM »
Not getting any response from the control panel, the board smells ok, door switch and thermal fuse are ok. any hints? the tech sheet says first replace console then board if that does not work.  :-\

Offline theuncleofamonkey

  • Technician
  • Member Since: Dec 2015
  • Posts: 2
  • Country: us
  • Hey dare, pal! What's crackin?
Re: kenmore 665.13929k010 no go
« Reply #1 on: February 12, 2016, 03:21:11 PM »
I believe this model has a ribbon wire going into the panel. If it does, check that ribbon visually for any signs of corrosion. If there is corrosion, odds are it's only the panel.

That bimetal fuse on the board is good to check though, I've had a few stump me before I started going there,  :)

You can always check and make sure the unit is getting proper voltage as well.

But yeah, otherwise, you could check the board for any visual signs of burnout, but board news is board news.

Hope it helps, Jacob
« Last Edit: February 12, 2016, 03:25:33 PM by theuncleofamonkey »
Phillipians 4:8-9

8 Finally, brethren, whatsoever things are true, whatsoever things are honest, whatsoever things are just, whatsoever things are pure, whatsoever things are lovely, whatsoever things are of good report; if there be any virtue, and if there be any praise, think on these things.

9 Those things, which ye have both learned, and received, and heard, and seen in me, do: and the God of peace shall be with you.

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 2515
  • Country: us
    • Buy me a beer through paypal
Re: kenmore 665.13929k010 no go
« Reply #2 on: February 12, 2016, 06:29:10 PM »
Some whirly pewls have a test built in. Look at tech sheet. Basically if you have bad keypad you unplug it then restore power, if the pump comes on its the pad. If not ....main.

Offline haroldshell

  • VIP Member
  • Member Since: Sep 2015
  • Posts: 71
Re: kenmore 665.13929k010 no go
« Reply #3 on: February 15, 2016, 10:44:35 AM »
 :thanks: i will check and report!

 

Kenmore Dishwasher - Doesn't always drain.

Started by yeltu1188

Replies: 1
Views: 6570
Last post September 15, 2007, 10:36:53 AM
by Pegi
Kenmore Elite Dishwasher

Started by sparky823

Replies: 8
Views: 8269
Last post October 11, 2007, 09:16:14 AM
by Pegi
Kenmore Elite Dishwasher Does Not Start

Started by rgletter

Replies: 5
Views: 8138
Last post December 14, 2007, 07:45:52 PM
by rickgburton
Kenmore 665 dishwasher chopper assembly cover

Started by tomnewf

Replies: 2
Views: 10579
Last post January 06, 2008, 10:59:43 AM
by AJ
Kenmore dishwasher

Started by lcsw

Replies: 4
Views: 6896
Last post February 08, 2008, 05:04:28 PM
by AJ
Kenmore dishwasher motor problem

Started by lgmccoy1

Replies: 3
Views: 10771
Last post February 22, 2008, 11:06:24 AM
by RegUS_PatOff