Author Topic: excess vibration  (Read 1520 times)

Offline oscar333

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 34
excess vibration
« on: December 04, 2009, 09:52:33 PM »
I have a Maytag Neptune that has a vibration in spin. It is sitting on a solid surface I checked for bearing play it is ok checked box and frame for cracks or bent areas that is ok shocks ok. It has less vibration empty in spin and when I put a load in get the clothes wet and spin out it has a terrible vibration help I am stumped
                                              Oscar

Model MAH6700AAW

Offline krazytech

  • Technician
  • Member Since: Sep 2007
  • Posts: 705
  • Country: us
    • Buy me a beer through paypal
Re: excess vibration
« Reply #1 on: December 04, 2009, 10:04:58 PM »
Have you check the pulley. cracked or bent or just out of balance .I have see them vibrate the whole machine... just a note..
Check the Basics first!!! Read the Manual !!!Buy the tech a Beer!!!

Offline oscar333

  • VIP Member
  • Member Since: Nov 2009
  • Posts: 34
Re: excess vibration
« Reply #2 on: December 04, 2009, 10:10:31 PM »
pulley is ok

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: excess vibration
« Reply #3 on: December 05, 2009, 06:43:09 AM »
Maytag made board changes  mid-production to compensate for  off-balance conditions, and added a motion sensor kit to monitor excessive tub movement, The sensor will count the number of times the tub is off balance and stop the spin to rearrange the load and try  again. Ordering a new PCB kit will incluide the new sensor plus instructions.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

131268200 Frigidaire Front Load Washer Vibration Shock Absorber

Started by AJ

Replies: 0
Views: 8445
Last post May 02, 2009, 08:55:47 AM
by AJ
Front Load Washer Vibration - Level Leg

Started by AJ

Replies: 2
Views: 1744
Last post April 08, 2010, 09:46:51 PM
by john63
Maytag Performa vibration and clacking!.....snubber and springs?

Started by rdway60

Replies: 0
Views: 2441
Last post October 02, 2010, 09:31:36 AM
by rdway60
MTW5740TQ0 with vibration

Started by simplehome

Replies: 2
Views: 736
Last post August 14, 2012, 04:00:34 PM
by JWWebster
Maytag MTW5740TQ0 Porforma with bad vibration

Started by asb

Replies: 5
Views: 1272
Last post August 18, 2012, 03:54:53 PM
by tgoods
Wpl duet vibration issue

Started by haroldsappliance

Replies: 3
Views: 642
Last post April 23, 2013, 06:17:30 AM
by ScottyMo1