Author Topic: ge timer  (Read 1886 times)

Offline mrfixit2

  • VIP Member
  • Member Since: Dec 2009
  • Posts: 3
ge timer
« on: December 07, 2009, 06:26:22 PM »
during the last wash cycle the timer gets stuck in one spot. in this spot it will wash forever. when i turn the timer one click it finishes the cycle fine. the dishes are hot and dry when the washing is completed so the heater is working. new timer time? thanks.

Model gsd3408k01sb

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: ge timer
« Reply #1 on: December 07, 2009, 07:20:46 PM »
That depends on which "spot" the timer stops at and which options are used in the wash cycle. For instance, if it stops during the time it should be heating the water, the timer will not advance until the small disc thermostat under the tub is satisfied. At this point, the contacts will close on the thermostat and the timer will advance onward if your mode is so equipped.

Other models have a cycle extender switch in the console that pulses power to the timer motor if the Potscrubber button is pressed. This too may affect the cycle if it fails.

Try the unit on a different cycle, say Light Wash for instance, with no heating or sani options selected and see if it makes a difference. If it stalls again, the timer is  the culprit, if it continues thru then you might suspect the cycle extender circuit. There is a wiring diagram in the control panel to assist you in your diagnosis.
« Last Edit: December 07, 2009, 07:30:19 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: ge timer
« Reply #2 on: December 07, 2009, 07:51:43 PM »
GE timers are notorious for getting hard to turn or stiff. Just 2 drops of machine oil (I like zoomoil) and a coupla quick twists of the timer that guy will quit hanging up. Seen it.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline mrfixit2

  • VIP Member
  • Member Since: Dec 2009
  • Posts: 3
Re: ge timer
« Reply #3 on: December 07, 2009, 07:58:43 PM »
thanks guys i'll try both.

 

How do I access Kenmore Washer Timer. 11023034100?

Started by wsommariva

Replies: 7
Views: 12405
Last post September 02, 2007, 04:58:36 PM
by AJ
maytag washer- timer problem?

Started by inot66

Replies: 6
Views: 5052
Last post January 10, 2008, 08:47:16 PM
by inot66
Video: How to remove whirlpool washer timer.

Started by AJ

Replies: 1
Views: 4033
Last post April 26, 2009, 07:41:04 PM
by ShawnTRD
Whirlpool timer?

Started by ceeyahd1

Replies: 16
Views: 3866
Last post June 21, 2010, 07:26:37 PM
by JWWebster
Installing a timer control part on Whirlpool washer

Started by Tnkrposit

Replies: 3
Views: 7705
Last post October 20, 2008, 06:42:42 AM
by Repair-man
Broken Timer Control Knob

Started by mcsquizzy

Replies: 2
Views: 1761
Last post October 26, 2008, 08:44:22 PM
by mcsquizzy